Fuji Xerox DocuPrint P255 d User Manual page 81

5
Enter the IP address of the printer in the address bar, and then press the Enter key.
The CentreWare Internet Services appears on your browser.
6
Configure wireless network settings for the printer on the CentreWare Internet Services.
7
Reboot the printer.
8
Restore the wireless network settings on your computer.
NOTE:
• If the operating system on your computer provides a wireless configuration software, use it to change the
wireless network settings. See the instructions below.
For Windows XP and Windows Server 2003:
Select Network Connections from Control Panel.
a
Right-click Wireless Network Connection and select Properties.
b
Select the Wireless Networks tab.
c
Ensure that the check box for Use Windows to configure my wireless network settings is
d
selected.
Click Advanced.
e
You can either set the printer to the ad-hoc mode or the infrastructure mode.
f
• For Ad hoc mode:
Select Computer-to-computer (ad hoc) networks only and close the dialog box.
• For Infrastructure mode:
Select Access point (Infrastructure) networks only and close the dialog box.
Click Add to display Wireless network properties.
g
Enter the setting that you will send to the printer and click OK.
h
Click Move up to move the setting to the top of the list.
i
Click OK to close the Wireless Network Connection Properties dialog box.
j
Printer Connection and Software Installation 81