Software Installation; Installation Of Softune Workbench - Fujitsu SK-91F467D-208PFV User Manual

Mb91460 series

Table of Contents

2.3 Software Installation

With the "SK-91F467D-208PFV" Starterkit Fujitsu supplies a full working development

environment called Softune Workbench V6. The Softune Workbench also supports a monitor

debugger which is pre-programmed into the internal Flash memory of the "SK-91F467D-

208PFV". To develop own software and to work with the monitor debugger of the "SK-

91F467D-208PFV" the Softune Workbench development environment must be installed first.

Follow the instructions for successful installation of the Softune Workbench.

1) Before starting the installation setup ensure that you are logged in with administrator

or poweruser permissions, otherwise the Softune installation will fail! Be aware that

Softune does not support multi-user support. Therefore install- and user login must

be the same.

2) Browse on the Starterkit CD-ROM into the directory Software\SWBInstall and start

the setup.exe

You can also start the installation using a browser by opening the index.html of the

CD-ROM. Use the link "Software\Softune Workbench\" in the left side frame.

3) Follow the installation instructions

4) For the default installation path it is recommended to use c:\Softune32

5) After the installation is finished. The FR Family Softune Workbench can be started

via the Windows "Start" menu

Figure 2-7: Softune Workbench start menu location

6) When Softune Workbench is started the following window will be shown

FMEMCU-UG-910014-10

SK-91F467D-208PFV V1.1

Installation

Figure 2-8: Softune Workbench V6 IDE

- 16 -

Table of Contents