Project Start-Up; Create A New Project - Fujitsu SK-91F467D-208PFV User Manual

Mb91460 series

Table of Contents

5.2 Project Start-up

In order to allow a quick and smooth project start-up Fujitsu Microelectronics Europe

supplies a template project as a reference. The easiest way to start a new project is to make

a copy of the template project and use this copy as a start-up. The template includes the

latest start91460.asm file, MCU header file, IRQ table, basic linker and C-Compiler settings.

Note:

In any case the settings done in the template must be checked and have to be

adjusted to the specific needs and settings of the final application. The template is

providing an example for building up a new project.

THIS SAMPLE CODE IS PROVIDED AS IS AND IS SUBJECT TO ALTERATIONS. FUJITSU

MICROELECTRONICS ACCEPTS NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS

OR/ELIGIBILITY FOR ANY PURPOSES.

1. In order to start a new user-project use the "Template" project

2. Copy the folder Template and rename the folder to e.g. my_application

3. Enter the folder "my_application"

Rename "template.prj" into "my_application.prj"

Rename "template.wsp" into "my_application.wsp"

4. Edit "my_application.prj"

Rename "template" -> "my_application"

5. Edit "my_application.wsp"

Rename "template" -> "my_application"

SK-91F467D-208PFV V1.1

Getting Started

- 37 -

FMEMCU-UG-910014-10

Table of Contents