Getting Started; Introduction To Softune Workbench - Fujitsu SK-91F467D-208PFV User Manual

Mb91460 series

Table of Contents

5 Getting Started

Make sure that the FR Family Softune Workbench is installed on your PC and the "SK-

91F467D-208PFV" is ready to use (power-on (X5), serial connection (UART4) to COM port

of the PC).

Start Softune Workbench. Select <File> <Open Workspace> to load the first example

"MB91460_io_91467d.wsp". All examples can be found in the folder \software\examples on

the Starterkit CD-ROM. It is recommended to copy this folder to the local hard-drive. In the

project tree on the left side, you can open the "source"-folder which contains the source-files

registered to this project. A double-click on one of the files will invoke the built-in editor,

which supports syntax-highlighting, tags and various other functions.

Figure 5-1: Softune Workbench main window

SK-91F467D-208PFV V1.1

Getting Started

Note:

You may customize the editor by a right-click on the editor

window.

- 35 -

FMEMCU-UG-910014-10

Table of Contents