Table of Contents
Advertisement
5.5 Memory Configuration for User Applications
Valid load module files can only be achieved if the language tool configuration is appropriate.
The most convenient way to create own projects is to copy the provided Template-Projects
from the example-directory and use it as "blank sheet".
If the Softune Workbench Monitor Debugger is being used the following memory areas are
reserved by the monitor debugger and must not be used by the application.
Memory Map of Softune Workbench Monitor Debugger
91460_mondeb_uart4-v11
Memory Type
Internal CPU Data
RAM
Internal Flash
Memory of
MB91F467D series
Note:
Be aware that the memory map may depend on the debugger version and any
modifications of the debugger made by the user.
Table 5-1: Memory map of Monitor Debugger 91460_mondeb_uart4-v11
© Fujitsu Microelectronics Europe GmbH
SK-91F467D-208PFV V1.1
Getting Started
Used for
Stack, Data
0x28000 - 0x28FFF
0x000F:0000-
Debug Kernel
0x000F:FFFF
0x0F:FC00-
Vector Table
0x0F:FFFF
Note:
The following chip select areas are used by the Softune
Workbench Monitor Debugger and must not be used or overlap
with other chip select areas:
CS1 – SRAM
- 49 -
Area(s)
STACK, DATA
CODE, CONST
INTVECT
0x0080.0000 - 0x009F.FFFF
FMEMCU-UG-910014-10
Sections
Advertisement
Table of Contents
