Traffic Control - Buffalo BS-MP20 Series User Manual

Traffic Control

Configure storm settings. If each packet exceeds the threshold configured on this page, exceeded packets will be
dropped.
Broadcast
Multicast
DLF
Ingress Bandwidth
Egress Bandwidth
Note: If the rate is configured based on broadcasts, multicasts, or DLF unicasts that sometimes cannot pass due to
the difference in traffic, configure the minimum rate of frames for normal use.
Select a rate to allow passing broadcasts.
Select a rate to allow passing multicasts.
Select a rate to allow passing DLF (destination lookup failure) unicasts.
Limits the bandwidth of ingress (input to the switch) speed as the configured
value.
Limits the bandwidth of egress (output from the switch) speed as the configured
value.
31