LevelOne MSL-3S79 User Manual page 86

show lldp remote
lldp-port [disable
|rx|tx|both]
ACL Commands Set
5 0 B
Commands
acl-port
[deny|permit]
or
no acl-port
acl-rule [index] dst
[dstIp/prefix] src
[srcIp/prefix]
{deny|permit}
or
no acl-rule [index]
show acl
[gigaethernet|port-
channel][port]
Privileged Show LLDP remote table.
EXEC
Interface
Use those commands to set
configuration lldp port tx and rx mode.
mode
Command
Level
Interface Use the acl-port interface
configuration
configuration command to
mode
enable Access Control on a
port. The default action can be
Deny or Permit. Use the no
form of this command to return
the port to its default value
(disable).
Interface
Use those commands to add or
configuration
delete the acl rules of the port.
mode [index] range= 0~4
Privileged
Show acl configuration of the
EXEC port.
Description
80
switch# show lldp remote
switch(config)# interface
Disable
gigaethernet 1
switch(config-if)# lldp-port
disable
or
switch(config-if)# lldp-port rx
Defaults
Disable switch(config)# interface
gigaethernet 1
switch(config-if)#
acl-port deny
or
switch(config-if)#
no acl-port
N/A switch(config)# interface
gigaethernet 1
switch(config-if)#
acl-rule 0 dst 192.168.16.1/32
src 192.168.16.2/32 permit
or
switch(config-if)#
no acl-rule 0
N/A switch# show acl gigaethernet
1
Example