mac-address-table
filter
or
show
mac-address-table
all
show
mac-address-table
aging-time
P ort Mirroring Commands Set
3 6 B
Commands
monitor
[port number]
[rx | tx | both]
or
no monitor [port
number| all]
show monitor
T FTP Commands Set
3 7 B
Commands
backup
flash:backup_cfg
restore
flash:restore_cfg
Privileged
S how current aging time setup
EXEC mode
Command
Level
Interface
Use the port monitor interface
configuration
configuration command to
mode
enable Switch Port Analyzer
(SPAN) port
monitoring on a port. Use the
no form of this command to
return the port to its default
value.
Privileged
Show port monitor information
EXEC
Command
Level
Global
Save configuration to TFTP
configuration
server and need to specify the
mode
IP of TFTP server and the file
name of image.
Global
Get configuration from TFTP
configuration
server and need to specify the
mode
IP of TFTP server and the file
name of image.
Description
Description
65
switch#show
mac-address-table all
switch#show
mac-address-table aging-time
Default
Example
switch(config)#interface
gigaethernet 1
switch(config-if)#monitor 3 both
or
switch(config-if)#no monitor 3
or
(Disable)
switch(config-if)#
no monitor all
switch#show monitor
Default
Example
switch(config)#backup
flash:backup_cfg
switch(config)#restore
flash:restore_cfg
TFTP server ip address
[192.168.16.2]:
Restore file name [restore.dat]:
*config success.*
Need help?
Do you have a question about the MSL-3S79 and is the answer not in the manual?