Table of Contents
Advertisement
AW00123402000
Specifications, Requirements, and Precautions
1.4
Mechanical Specifications
The camera housing conforms to protection class IP30 assuming that the lens mount is covered by
a lens or by the plastic cap that is shipped with the camera.
1.4.1
Camera Dimensions and Mounting Points
The dimensions in millimeters for cameras equipped with a C-mount lens adapter are as shown in
Figure
19. The dimensions in millimeters for cameras equipped with a CS-mount lens adapter are
as shown in
Figure 20
Camera housings are equipped with mounting screw holes on the bottom as shown in the drawings.
For mounting instructions, see Section 1.5 on
page
26.
Basler ace USB 3.0
21
Advertisement
Table of Contents
