Setting Error Codes; Registering Error Codes In User Settings - Mitsubishi Electric G-50A Operation Manual

6-3 Setting Error Codes

Display the page needed to perform the user settings for the error codes used when sending mail by clicking
[Mail Setting]-[Error Mail Setting 2] in the setting menu pane. On this page, you can individually set which errors
require mail to be sent.
Click [Get from G-50A] to get data currently stored on the G-50A, or click [Set to G-50A] to send setting data to
the G-50A.

6-3-1 Registering error codes in User Settings

For each User Setting, up to 20 error codes corresponding to errors occurring on air conditioners that require
mail to be sent can be set in the [Error Code] field. You can set individual error codes such as [1302] and [6607],
or you can make settings such as [10**] and [12**]. For example, if the setting [10**] is made, error mail will be
sent every time an error with an error code of [1000] through [1099] occurs.
When using this page to set error codes ensure that the mail recipients registered for each user setting are also
registered in the [Error Mail Setting 1] page.
Get from G-50A
Read the error code setting from G-50A.
-20-
Error Code Setting
Set the error codes that require
mail to be sent.
Set to G-50A
Send error code setting to
G-50A.