2 Installing and Uninstalling Initial Setting Tool
Given below is an explanation on how to install and uninstall Initial Setting Tool, and start and close the program.
2-1 Installing Initial Setting Tool
(1) Insert Initial Setting Tool Setup Disk into the CD-ROM of the PC
you are installing the program on. Preparation for setup will begin
automatically and the dialog shown on the right will appear on
screen.
Click [Next] to proceed with installing Initial Setting Tool and
advance to the next dialog.
(2) The next dialog will appear showing the destination folder to which
Initial Setting Tool will be installed. To choose the default folder
address displayed on the dialog, click [Next]. To modify the folder
address, click [Change ]. After specifying your choice of folder,
click [Next].
The default destination folder address is:
C:\Program Files\G-50A\InitTool\
(3) When the setup program has installed the program in the selected
destination folder, the dialog shown on the right will appear. Click
[Finish] to complete the installation process.
-2-