Setting / Calling A Preset - HIKVISION DS-2CD2132-I User Manual

User Manual of Network Camera

5.4.2 Setting / Calling a Preset

 Setting a Preset:
1. In the PTZ control panel, select a preset number from the preset list.
2. Use the PTZ control buttons to move the lens to the desired position.
• Pan the camera to the right or left.
• Tilt the camera up or down.
• Zoom in or out.
• Refocus the lens.
3. Click to finish the setting of the current preset.
4. You can click
Note: You can configure up to 128 presets.
 Calling a Preset:
This feature enables the camera to point to a specified preset scene manually or
when an event takes place.
For the defined preset, you can call it at any time to the desired preset scene.
In the PTZ control panel, select a defined preset from the list and click
preset.
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Lo-Call 1890 866 900
Adjust speed of pan/tilt movements
Setting a Preset
Figure 5-3
to delete the preset.
www.cctvireland.ie
Focus near/far
Iris open/close
Light on/off
Wiper on/off
One-touch focus
Initialize lens
32
to call the
shop@cctvireland.ie