Configuring Port Settings; Configuring Pppoe Settings - HIKVISION DS-2CD2132-I User Manual

User Manual of Network Camera
3. Click
Note: it will ask for a reboot for the settings to take effect.

6.3.2 Configuring Port Settings

Purpose:
You can set the port No. of the camera, e.g. HTTP port, RTSP port and HTTPS port.
Steps:
Enter the Port Settings interface:
1.
Configuration > Basic Configuration > Network > Port
Or Configuration > Advanced Configuration > Network > Port
2. Set the HTTP port, RTSP port and HTTPS port of the camera.
HTTP Port: The default port number is 80, and can be changed to any port range
1024 to 65535.
RTSP Port: The default port number is 554.
HTTPS Port: The default port number is 443, and can be changed to any port
range 1024 to 65535.
SDK Port: The default SDK port number is 8000.
3. Click
Note: it will ask for a reboot for the settings to take effect.

6.3.3 Configuring PPPoE Settings

Steps:
1. Enter the PPPoE Settings interface:
Configuration >Advanced Configuration > Network > PPPoE
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Lo-Call 1890 866 900
to save the above settings
Port Settings
Figure 6-7
to save the settings.
www.cctvireland.ie
.
38
shop@cctvireland.ie