Operating Ptz Control; Ptz Control Panel - HIKVISION DS-2CD2132-I User Manual

User Manual of Network Camera
click to record the live video. The saving paths of the captured pictures and
clips can be set on the Configuration > Local Configuration page. To configure
remote scheduled recording, please refer to Section 6.2.
Note: The captured image will be saved as a JPEG file in your computer.

5.4 Operating PTZ Control

Purpose:
In the live view interface, you can use the PTZ control buttons to realize
pan/tilt/zoom control of the camera.
Before you start:
To realize PTZ control, the camera connected to the network must support the PTZ
function or a pan/tilt unit has been installed to the camera. Please properly set the
PTZ parameters on RS-485 Settings page referring to Section 10.6 RS-485 Settings.

5.4.1 PTZ Control Panel

On the live view page, click
hide it.
Click the direction buttons to control the pan/tilt movements.
Click the zoom/iris/focus buttons to realize lens control.
Notes:
 There are 8 direction arrows ( ,
window when you click and drag the mouse in the relative positions.
 For the cameras which support lens movements only, the direction buttons are
invalid.
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Lo-Call 1890 866 900
to show the PTZ control panel or click
PTZ Control Panel
Figure 5-2
Descriptions of PTZ Control Panel
Table 5-2
Button
www.cctvireland.ie
, , , , ,
Description
Zoom in/out
31
to
, ) in the live view
shop@cctvireland.ie