HIKVISION DS-2CD2142FWD-IWS Quick Start Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Security Camera
  5. DS-2CD2142FWD-IWS
  6. Quick start manual

HIKVISION DS-2CD2142FWD-IWS Quick Start Manual

Network dome camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Network Dome Camera
Quick Start Guide
0

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION DS-2CD2142FWD-IWS

Summary of Contents for HIKVISION DS-2CD2142FWD-IWS

  • Page 1 Network Dome Camera Quick Start Guide...
  • Page 2 Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision.
  • Page 3 LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS.
  • Page 4 Network Dome Camera·Quick Start Guide APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. Regulatory Information For products that support Wi-Fi or cellular data: (Marked with a “W”, “GLT”, “GLE”, “GLF”, “GE”, “GT”...
  • Page 5 Network Dome Camera·Quick Start Guide —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.
  • Page 6 Network Dome Camera·Quick Start Guide 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg).
  • Page 7 Network Dome Camera·Quick Start Guide radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé...
  • Page 8 Network Dome Camera·Quick Start Guide energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the...
  • Page 9 Network Dome Camera·Quick Start Guide 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.
  • Page 10 Network Dome Camera·Quick Start Guide Warnings Follow these Cautions Follow these safeguards to prevent precautions to prevent serious injury or death. potential injury or material damage. Warnings ● In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region.
  • Page 11 Network Dome Camera·Quick Start Guide ● Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. Cautions ● Make sure the power supply voltage is correct before using the camera. ● Do not drop the camera or subject it to physical shock. ●...
  • Page 12 Network Dome Camera·Quick Start Guide ● While in delivery, the camera shall be packed in its original packing, or packing of the same texture. ● Regular part replacement: a few parts (e.g. electrolytic capacitor) of the equipment shall be replaced regularly according to their average enduring time.

  • Page 13: Table Of Contents

    Network Dome Camera·Quick Start Guide Table of Contents 1 Appearance Description ............... 13 Type I ................13 Type II ................14 Type III ................16 Type IV ................18 Type V ................19 2 Installation ..................22 Memory Card Installation ..........23 Ceiling Mounting ............

  • Page 14: Appearance Description

    Network Dome Camera·Quick Start Guide 1 Appearance Description There are five types of camera appearance for this series of camera according to the different models. Type I Figure 1-1 Overview of Type I Camera Table 1-1 Description of Type I Camera Description Description Mounting Base...
  • Page 15 Network Dome Camera·Quick Start Guide Description Description Network Interface Power Interface IR LED Lens Black Liner Safety Rope Note: Press RESET about 10s when the camera is powering on or rebooting to restore the default settings, including the user name, password, IP address, port No., etc.
  • Page 16 Network Dome Camera·Quick Start Guide Table 1-2 Description of Type II Camera Description Description Mounting Base Horizontal Stand Vertical Stand Bubble Network Interface Power Interface IR LED Lens Black Liner Safety Rope Audio Interface (Only Alarm Interface (Only supported by the camera supported by the camera with “-S”...

  • Page 17: Type Iii

    Network Dome Camera·Quick Start Guide Type III DC12VIN Figure 1-3 Overview Of Type III Camera...
  • Page 18 Network Dome Camera·Quick Start Guide Table 1-3 Description of Type III Camera Description Power supply interface (12 VDC) Audio input and output interface Alarm input and output interface RJ45 self-adaptive network interface (PoE) Mounting base Black liner Lens Bubble Memory card slot Reset button Note: ●...

  • Page 19: Type Iv

    Network Dome Camera·Quick Start Guide Type IV Figure 1-4 Overview Of Type IV Camera...

  • Page 20: Type V

    Network Dome Camera·Quick Start Guide Table 1-4 Description of Type IV Camera Description RJ45 self-adaptive network interface (supports PoE) HDMI Mounting base Black liner Lens Bubble Memory card slot Reset button Note: Press RESET about 10s when the camera is powering on or rebooting to restore the default settings, including the user name, password, IP address, port No., etc.
  • Page 21 Network Dome Camera·Quick Start Guide Figure 1-5 Overview Of Type V Camera Table 1-5 Description of Type V Camera Description Description Mounting Base Horizontal Stand Bubble Network Interface Power Interface IR LED Lens Black Liner Safety Rope...
  • Page 22 Network Dome Camera·Quick Start Guide Note: Press RESET about 10s when the camera is powering on or rebooting to restore the default settings, including the user name, password, IP address, port No., etc.

  • Page 23: Installation

    Network Dome Camera·Quick Start Guide 2 Installation Before you start: ● Make sure the device in the package is in good condition and all the assembly parts are included. ● The standard power supply is 12 VDC or PoE (802.3 af), please make sure your power supply matches with your camera.

  • Page 24: Memory Card Installation

    Network Dome Camera·Quick Start Guide Memory Card Installation For camera models that support memory card as local storage, you can follow the steps to mount and unmount the memory card. This camera series shares a similar structure, type III camera is used for demonstration.

  • Page 25: Ceiling Mounting

    Network Dome Camera·Quick Start Guide Find the memory card slot to insert the memory card. Figure 2-2 Insert Memory Card (Optional) To unmount the memory card, push to get it ejected. Ceiling Mounting This camera series shares a similar structure, type III camera is used for demonstration.
  • Page 26 Network Dome Camera·Quick Start Guide Drill Template Hole A: for cables routed through the ceiling Screw hole 1: for Mounting Base Figure 2-3 Drill Template Notes: ● If you choose to route cable through the ceiling, cut a cable hole according to Hole A on drill template. ●...
  • Page 27 Network Dome Camera·Quick Start Guide Route the cables and fix the mounting base on the ceiling with three screws. Figure 2-5 Fix the Mounting Base Adjust surveillance angle. See the figure of each camera type for detailed angle adjustment range Loosen one tilting adjust adjusting screw to adjust the tilting position.
  • Page 28 Network Dome Camera·Quick Start Guide 0°~360° Tilting Adjust Screw 0°~65° Figure 2-6 Angle Adjustment of Type I Camera Tilt: Pan: 0° to 75° 0° to 355° Tilting Adjust Screw Rotate: 0° to 355° Figure 2-7 Angle Adjustment of Type II Camera...
  • Page 29 Network Dome Camera·Quick Start Guide Figure 2-8 Angle Adjustment of Type III Camera Install the bubble back to the camera. Figure 2-9 Install Bubble...

  • Page 30: Mounting With Brackets

    Network Dome Camera·Quick Start Guide Mounting with Brackets This camera series supports mounting with wall mounting bracket, pendant mounting bracket, and incline mounting bracket. We take Type III camera as the demonstration example. 2.3.1 Wall Mounting The wall mounting bracket is not included in the package. You need to prepare one, if you adopt this mounting type.
  • Page 31 Network Dome Camera·Quick Start Guide 2. Drill 4 screw holes for expansion screws. 3. Unscrew the bubble of the camera. 4. (Optional) Insert the memory card to the camera, if your camera supports memory card installation. Refer to Section 2.1. 5.
  • Page 32 Network Dome Camera·Quick Start Guide Figure 2-12 Fix the Wall Mounting Bracket to Wall 7. Adjust surveillance angle of camera. Refer to Step 4 in Section 2.2. 8. Install the bubble back to the camera. Figure 2-13 Install the Bubble...
  • Page 33 Network Dome Camera·Quick Start Guide 2.3.2 Wall Mounting with Junction Box The wall mounting bracket with junction box is not included in the package. You need to prepare one, if you adopt this mounting type. Steps: 1. Mark the screw holes on desired mounting place. 2.
  • Page 34 Network Dome Camera·Quick Start Guide Cover Figure 2-15 Unscrew the Cover 4. Route and connect the cables. Source cables of network, power, etc., go in from the side outlet of the junction box. Camera cables go in from the cap and the bracket.
  • Page 35 Network Dome Camera·Quick Start Guide Camera Cable Source Cable Figure 2-16 Cable Routing 6. Unscrew the bubble of the camera. 7. (Optional) Insert the memory card to the camera, if your camera supports memory card installation. Refer to Section 2.1. 8.
  • Page 36 Network Dome Camera·Quick Start Guide Figure 2-17 Fix the Camera to Wall Mounting Bracket 9. Adjust surveillance angle of camera. Refer to Step 4 in Section 2.2. 10. Install the bubble back to the camera. Figure 2-18 Install the Bubble...
  • Page 37 Network Dome Camera·Quick Start Guide 2.3.3 Pendant Mounting The pendant mounting bracket is not included in the package. You need to prepare one in advance, if you adopt this mounting type. Steps: 1. Mark the screw holes on desired mounting place. 2.
  • Page 38 Network Dome Camera·Quick Start Guide Figure 2-20 Fix the Camera to Cap 6. Screw the cap to the pendant mounting bracket. Figure 2-21 Install the Cap...
  • Page 39 Network Dome Camera·Quick Start Guide 7. Adjust surveillance angle of camera. Refer to Step 4 in Section 2.2. 8. Install the bubble back to the camera. 2.3.4 Incline Mounting The incline mounting bracket is not included in the package. You need to prepare one, if you adopt this mounting type.
  • Page 40 Network Dome Camera·Quick Start Guide Figure 2-23 Fix Incline Mounting Bracket to Wall 4. Unscrew the bubble of the camera. 5. (Optional) Insert the memory card to the camera, if your camera supports memory card installation. Refer to Section 2.1. 6.

  • Page 41: Optional) Network Cable Waterproof Jacket Installation40

    Network Dome Camera·Quick Start Guide 7. Adjust surveillance angle of camera. Refer to Step 4 in Section 2.2. 8. Install the bubble back to the camera. Figure 2-25 Install the Bubble (Optional) Network Cable Waterproof Jacket Installation Purpose: If the camera is installed outdoor, you can adapt the waterproof accessory for the network cable after the camera is secured on the installation surface.
  • Page 42 Network Dome Camera·Quick Start Guide ① ② ③ ④ ⑤ ⑥ ⑦ Figure 2-26 Waterproof Accessory Components Table 2-1 Components Components Camera’s Network Interface Socket O-Type Gasket Network Plug Waterproof Endcap Waterproof Rubber Gasket Lock Nut Network Cable from Router/Switch Steps: Feed the plugless network cable ⑦...
  • Page 43 Network Dome Camera·Quick Start Guide Place the O-type gasket ② onto the end of the camera’s network interface socket ①. Insert the network plug ③ into the camera’s network interface socket ①. Insert the waterproof rubber gasket ⑤ into the waterproof endcap ④, and secure lock nut ⑥...

  • Page 44: Set The Network Camera Over The Lan

    Network Dome Camera·Quick Start Guide 3 Set the Network Camera over the Note: You shall acknowledge that the use of the product with Internet access might be under network security risks. For avoidance of any network attacks and information leakage, please strengthen your own protection.

  • Page 45: Activate The Camera

    Network Dome Camera·Quick Start Guide Activate the Camera You are required to activate the camera first by setting a strong password for it before you can use the camera. Activation via web browser, activation via SADP, and activation via client software are all supported. We will take activation via SADP software and activation via web browser as examples to introduce the camera activation.
  • Page 46 Network Dome Camera·Quick Start Guide Figure 3-3 Activation Interface (Web) 3. Create a password and input the password into the password field. STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.
  • Page 47 Network Dome Camera·Quick Start Guide Get the SADP software from the supplied disk or the official website, and install the SADP according to the prompts. Follow the steps to activate the camera. Steps: 1. Run the SADP software to search the online devices. 2.

  • Page 48: Modify The Ip Address

    Network Dome Camera·Quick Start Guide STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.
  • Page 49 Network Dome Camera·Quick Start Guide Steps: 1. Run the SADP software. 2. Select an active device. 3. Change the device IP address to the same subnet with your computer by either modifying the IP address manually or checking Enable DHCP. Figure 3-5 Modify the IP Address...
  • Page 50 Network Dome Camera·Quick Start Guide Note: You can enable the Hik-Connect service for the device during activation. Refer to Chapter 5.1 for detailed information. 4. Input the admin password and click Modify to activate your IP address modification. The batch IP address modification is supported by the SADP. Refer to the user manual of SADP for details.

  • Page 51: Access Via Web Browser

    Network Dome Camera·Quick Start Guide 4 Access via Web Browser System Requirement: Operating System: Microsoft Windows XP SP1 and above version CPU: 2.0 GHz or higher RAM: 1G or higher Display: 1024×768 resolution or higher Web Browser: Internet Explorer 8.0 and above version, Apple Safari 5.0.2 and above version, Mozilla Firefox 5.0 and above version and Google Chrome 18 and above version Steps:...
  • Page 52 Network Dome Camera·Quick Start Guide 4. Click Login. Figure 4-1 Login Interface 5. Install the plug-in before viewing the live video and managing the camera. Follow the installation prompts to install the plug-in. Note: You may have to close the web browser to finish the installation of the plug-in.

  • Page 53: Operate Via Hik-Connect App

    Network Dome Camera·Quick Start Guide 5 Operate via Hik-Connect App Purpose: Hik-Connect is an application for mobile devices. With the App, you can view live image of the camera, receive alarm notification and so Note: Hik-Connect service is not supported by certain camera models. Enable Hik-Connect Service on Camera Purpose: Hik-Connect service should be enabled on your camera before using...
  • Page 54 Network Dome Camera·Quick Start Guide Figure 5-1 Verification Code Setting (SADP) Note: The verification code is required when you add the camera to Hik-Connect app. 3. Click and read "Terms of Service" and "Privacy Policy". 4. Confirm the settings. 5.1.2 Enable Hik-Connect Service via Web Browser Before you start: You need to activate the camera before enabling the service.
  • Page 55 Network Dome Camera·Quick Start Guide Steps: 1. Access the camera via web browser. Refer to Chapter 4. 2. Enter platform access configuration interface: Configuration > Network > Advanced Settings > Platform Access. Figure 5-2 Platform Access Configuration (Web) 3. Select Platform Access Mode as Hik-Connect. 4.

  • Page 56: Hik-Connect Setup

    Network Dome Camera·Quick Start Guide Hik-Connect Setup Steps: 1. Download and install the Hik-Connect app by searching “Hik-Connect” in App Store or Google Play 2. Launch the app and register for a Hik-Connect user account. 3. Log in Hik-Connect app after registration. Add Camera to Hik-Connect Before you start: You need to enable the Hik-Connect service on camera before...
  • Page 57 Network Dome Camera·Quick Start Guide You can find the QR code on the camera or on the cover of the Quick Start Guide of the camera in the package. Figure 5-4 Scan QR Code Note: If the QR code is missing or too blur to be recognized, you can also add the camera by tapping the icon and inputting the camera's serial number.

  • Page 58: Initialize The Memory Card

    Network Dome Camera·Quick Start Guide Initialize the Memory Card Steps: Check the memory card status by tapping on the Storage Status in the Device Settings interface. If the memory card status displays as Uninitialized, tap to initialize it. The status will then change to Normal. You can then start recording any event triggered video in the camera such as motion detection.
  • Page 59 UD07705B...

This manual is also suitable for:

Ds-2cd2122fwd-is-2-8mm

Table of Contents