Appendix
Indicators and Projector Condition
Check the indicators for the projector condition.
The projector is operating normally.
Indicators
WARNING
POWER
LAMP
TEMP .
green
red
✽
• • • on
• • • dim
• • • off
86
WARNING
SHUTTER
FILTER
blue
red
orange
✽
✽
✽
✽
✽
✽
✽
✽
✽
✽
✽
• • • blinking at the normal rate
(approx. 1 second ON,
1 second OFF)
• • •
blinking fast
0.5 seconds ON, 0.5
seconds OFF)
✽
• • • Differs according to conditions.
Projector Condition
LAMP
REP .
orange
The projector is off. (The main On/Off switch is OFF
position or the AC power cord is unplugged.)
The projector is in stand-by mode. Press the ON/
✽
STAND-BY button to turn on the projector.
The projector is operating normally.
✽
(The Shutter is open)
The projector is operating normally.
✽
(The Shutter is closed)
The projector is preparing for stand-by or the
projection lamp is being cooled down. The projector
✽
cannot be turned on until cooling is completed and
the POWER indicator lights green.
The projection lamp is being cooled down in the
✽
Power management mode.
✽
The projector is in the Power management mode.
The projection lamp is being cooled down in the
✽
Shutter management mode.
The projector is in the Shutter management mode.
Press the ON/STAND-BY button to turn on the
✽
projector.
The projector is cleaning the filter.
✽
(approx.
• • • blinking slowly
(approx. 2 seconds ON,
2 seconds OFF)
• • • blinking slowly
(approx. 1 second ON,
5 seconds OFF)
L2K1500 User Manual
020-000387-01 Rev.1 (05-2011)