Christie L2K1000 User Manual
  1. Manuals
  2. Brands
  3. Christie Manuals
  4. Projector
  5. L2K1000
  6. User manual

Christie L2K1000 User Manual

Hide thumbs Also See for L2K1000:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual, Setup Manual
L2K1000
Network Set-up & Operation
U S E R M A N U A L
020-000395-01

Advertisement

Table of Contents
loading

Related Manuals for Christie L2K1000

Summary of Contents for Christie L2K1000

  • Page 1 L2K1000 Network Set-up & Operation U S E R M A N U A L 020-000395-01...

  • Page 3: User Manual

    Read this manual thoroughly to operate the Network function. First, read the user's manual of the projector to understand the basic operation of the projector and the safety instructions. The safety instructions in the user's manuals should be followed strictly. User Manual for L2K1000...

  • Page 4: Compliance

    WARNING This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 5: Safety Instructions

    ● We assume no responsibility for the loss or damage of data, or damage of the computer caused by using this projector. Making back-up copies of valuable data in your computer is recommended. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 6: Table Of Contents

    Setting 4 ..................................43 Information ..................................44 Information 1 ................................44 Information 2 ................................45 Network..................................45 Chapter 5 Appendix ....................47 Examples of connection ............................48 Use of telnet ..................................50 Web browser setting ..............................52 Examples: OS/Browsers .............................53 Q&A ......................................57 L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 7: Chapter 1 Preparation

    Chapter 1 Preparation Describes features and operating environment of this projector. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 8: Features

    Internet SNMP managing software. Refer Intranet to the owner's manual of the You received "PJ Network Manager" supplied Trap a Trap. separately for further details. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 9: Required Operating Environment For Computers

    If you do not use the func- tion E-mail Alert, this application is not required. Network specifications of the projector LAN Terminal Data communication standards 10/100/1000Base-T compatible Physical layer 10Base-T Protocol TCP/IP L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)
  • Page 10 Other product or brand names in this manual are registered trademarks or trademarks of their respective owners. * Unauthorized use of a part or whole of the contents in this manual is prohibited. * The contents of this manual are subject to change without notice. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 11: Flow Of Installation

    So it is not required to install the software into your computer. For PJ Network Manager function, it is required to install the software. Please see the own- er's manual of "PJ Network Manager Function". L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)
  • Page 12 Chapter 1 Preparation L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 13: Chapter 2 Setup Procedures

    Chapter 2 Setup Procedures Describes how to configure the network. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 14: Connecting To The Lan Line

    “Please wait...” message will appear, and switching operation will start. Switching will take a while and the projector’s LINK/ACT Lamp will be on or blink, and after completing the operation, the “Please wait...” message will disappear. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)
  • Page 15 *1 Set "On" only when the DHCP server is available on your network environment. *2 Set [255.255.255.255] if the network does not provide the gateway (router). *3 Set [255.255.255.255] if you do not use the function E-mail alert. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 16: Network Pin Code

    Select "Network information" in the Network menu and press Point 8 or SELECT button to show LAN setting environment of the currently selected projector. (The description below is an example and different from what will be shown.) * The numerical value is a setting example. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 17: Network Factory Default

    4. All the wired LAN settings will go back to the factory default settings. For details, refer to “Wired LAN factory default settings” as shown in the table below. Wired LAN factory default settings Parameter Settings DHCP IP ADDRESS 169.254.100.100 SUBNET MASK 255.255.0.0 GATEWAY ADDRESS 255.255.255.255 DNS ADDRESS 255.255.255.255 L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)
  • Page 18 Chapter 2 Setup Procedures L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 19: Chapter 3 Basic Setting And Operation

    Describes basic operations and settings for controlling the projec- tor by using the web browser. It is required that computer and projector is connected to the network and the network address is properly configured. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 20: Login The Setting Page Of The Projector

    * The entering User Name must be "user" and it can not be changed. [Note] When accessing the projector for the first time or the Network PIN code "0000" is set, the auto-login will be performed and the next main setting page is displayed. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 21: Display Of Main Setting Page

    Sub menu tab Switches the sub menu tab. Setting page Main menu Displays the control and For selection of control and setting items according to setting items of the projector. the selected menu. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 22: How To Use The Setting Page

    Each item has a valid setting range. The setting value exceeding this becomes invalid. Some con- ✐ trol items can not be used depending on the selecting input mode or functions of the projector you use. In this case, the values of those items are indicated with "---". L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)
  • Page 23 How to use the setting page Radio button setting Select an item by selecting a radio button. Check box setting Select items by ticking on check boxes. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 24: Initial Setting

    Network PIN code ..Sets the Network PIN code to login the setting page (+p.23) Temperature ..Switches display temperature unit. (Centigrade, Fahrenheit) PJLink ....... Switches PJLink password authentication. (ON, OFF) (+p.23) Password ....Password for PJLink function (+p.23) L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 25: Network Pin Code Setting

    AUX 1 Input 2 Video VIDEO 1 Y, Pb/Cb, Pr/Cr VIDEO 2 RGB 3 S-video VIDEO 5 INPUT 2 AUX 2 Input 3 INPUT 3 AUX 3 Input 4 INPUT 4 AUX 4 L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 26: Network Configuration

    * If you make incorrect settings, you cannot find out the new network settings. Be careful to set up them correctly, otherwise you cannot connect to the projector. It is recommended to make a note of them. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 27: E-Mail Setting

    Password ......... Enter SMTP password. (up to 63 characters) POP server ....... Enter server name or IP address of the POP server. (up to 60 characters) POP server port ....Enter Port number of the POP server. (from 1 to 65535) L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)
  • Page 28 ✐ The projector does not send message to the address set in "Administrator address" text box. If you want to send e-mails to the administrator address, enter the administrator address into "Add address" text box. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)
  • Page 29 Standby in proper user operation" signifies that the projector is turned on by using the web browser and then it is turned into standby with ON/STANDBY button on the side control or the remote control. Up to 99,999 hours can be set for use time. ✐ L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 30: Examples: Type And Contents Of Alert Mail

    * The brightness (Current value) continuously goes down a certain rate from the value in Constant mode. Check the lamp status and replace the lamp, or decrease Target value in Constant mode. ✐ This alert mail will be sent when "Lamp mode" is set to "Constant mode". L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 31: Snmp Setting

    Community name(refer) ..Enter community name (read only). Default name is "public". Trap Item Description Community name ...... Enter community name to send "Trap". Default name is "public". Trap address ........Enter IP address of the SNMP manager computer to receive "Trap". L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)
  • Page 32 Standby in proper user operation" signifies that the projector is turned on by using the web browser and then it is turned into standby with ON/STANDBY button on the side control or the remote control. Up to 99,999 hours can be set for the time setting. ✐ L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 33: Chapter 4 Controlling The Projector

    Chapter 4 Controlling the Projector Describes controlling and setting of the projector by using the web browser. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 34: Power Control And Status Check

    * The temperature unit can be set either Centigrade or Fahrenheit in the item "Initial Setting". (+p.22) ✐ The projector cannot be turned on while the projector is on cooling down. ✐ The web browser checks and updates the projector's condition every 30 seconds automatically. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)
  • Page 35 To control the projector through the network temporarily, execute "PJ lock suspend" command to unlock the security. "PJ lock suspend" is on setting sub menu [3] on Setting main menu. (+p.42) L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 36: Control

    For further information , refer to the projector's owner's manual. ✐ When the projector is in standby, all the controlling items are inactive. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 37: System

    * The selectable scanning systems are 480i, 575i, 480p, 575p, 720p, 1035i, 1080i and 1080p. ✐ If the mode (Mode1 to Mode10) which is stored in the item "PC Adjustment" (+ p.37) is available, they are also listed together with the above mode. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 38: Image Adjustment

    ✐ The mark " " means that the available image mode in the Dynamic selected input source. The error message appears when Image1 - 10 selecting the disabled image mode indicated with "*". L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 39: Pc Adjustment

    Mode Store ..Stores the PC adjustment values. Select a mode no. [Mode1 - Mode10] from the pull-down menu. Mode Free .... Clear the PC adjustment values. Select a mode no. [Mode1 - Mode10] from the pull- down menu. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 40: Setting Up The Projector

    Custom) Ceiling ..... Sets the image top/bottom and left/ right reversed. (ON, OFF) Rear ......Sets the image left/right reversed. (ON, OFF) * See the next page for the description of other functions. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 41: Lens Adjustment

    *1 The error message appears when selecting the disabled screen mode indicated with "*1". *2 Natural wide cannot be selected when 720p, 1035i, 1080i, 1080p or 2K is selected in AV system menu. *3 Wide(16:9) can be selected when the video signal is 2K. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 42: Setting 1

    * OFF ..The lamp switching function is disable. * When constant mode is selected in "Lamp mode", this function is disable. HDMI setup ..Sets the digital RGB image level according to the HDMI source. (Normal, Enhanced) L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 43: Setting 2

    Mode Free .... Clear the adjustment values. Select a mode no. [User1 - User5] from the pull-down menu. * Step(s) ....Sets the effective steps (1-20 steps) by one pressing the +/- or Up/Down/Left/Right buttons to adjust them quickly. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 44: Setting 3

    Time ...... Sets the specified period of time when the projector shuts down after the projector is left with the shutter closed. * The specified time can be set 5 to 480 min. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 45: Setting 4

    User Logo, Logo PIN code lock, PIN code lock, Lamp Corres. Value, Filter counter, PJ time, Network PIN code, Network setting * This function is not effective for the settings of Network address settings, e-mail settings, etc. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 46: Information

    Lamp status ......Displays the status of the 2 lamps with an icon. Refer to the table on page Lamp Corres. Value(h) ..Displays the use time (Corresponding value) of the 2 lamps. * When PIP mode is active, displays Input, System, and Screen to "PIP mode". L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 47: Information 2

    Option control No....Displays the option control number for purchasing suitable optional terminal boards. Network Items Description MAC address......Displays MAC address of the projector. IP address ........Displays the IP address of the projector. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)
  • Page 48 Good condition. Blue Filter is almost clogged. Yellow/Gray Filter is clogged. Replace a filter with new one. * When the projector cannot decode the return from the filter cartridge, Red/Gray this icon also appears. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 49: Chapter 5 Appendix

    Chapter 5 Appendix Connection examples Use of telnet Web browser setting Q & A L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 50: Examples Of Connection

    : 0.0.0.0 Computer Name: PC10 IP Address : 192.168.0.10 Subnet Mask : 255.255.255.0 Default Gateway ✐ When the projector is connected to the computer directly without hub, the UTP cross cable should be used. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)
  • Page 51 : 255.255.255.0 Subnet Mask : 255.255.255.0 Default Gateway : 192.168.10.1 Default Gateway : 192.168.10.1 Default Gateway : 192.168.10.1 Default Gateway : 192.168.10.1 : 192.168.201.1 : 192.168.201.1 : 192.168.201.1 : 192.168.201.1 Network Group: 192.168.10.0 L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 52: Use Of Telnet

    2. The telnet application will start and the following window will be displayed. Type as below to connect the projector. > open 192.168.1.201 10000 [return] * Use the IP address assigned to the projector. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)
  • Page 53 Please try again for the connection. If the password or any command is not entered for more than 30 seconds, the communication will ✐ be disconnected automatically. Please try again for the connection. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 54: Web Browser Setting

    ✐ There are various ways to change your browser preferences depending on the version or applica- tions. Please see the setting instructions on next page for example and also refer to on-line help of your web browser. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 55: Examples: Os/Browsers

    Select Internet Options from Tools menu on the web browser and then select Security tab and click Customize Level… button. On the security setting window, scroll down and find the Scripting item, make sure that "Enable" is selected in item Active Scripting. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 56: Proxy Setting

    If you connect the projector to the computer directly with UTP cross cable, this must be unchecked. To designate proxy settings that will not use the proxy server when accessing the projector installed in the local area network, enter the IP address or domain name here. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)
  • Page 57 UTP cross cable, this must be selected. To designate proxy settings that will not use the proxy server when accessing the projector installed in the local area net- work, enter the IP address or domain name here. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)
  • Page 58 If you connect the projector to the computer directly with UTP cross cable, they must be unchecked. To designate proxy settings that will not use the proxy server when accessing the projector installed in the local area network, enter the IP address or domain name here. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)

  • Page 59: Q&A

    (Connect to the company’s network from the branch office or maintenance office by using private line.) ☛ Use of internet (Connect to the company’s network from your home, branch office or some other places by using the internet.) L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)
  • Page 60 Can I register the setting page as a web browser "Favorites" or "Bookmarks"? Please add "Login" page to your "Favorites" or "Bookmarks". Do not add the speci- fied setting page because it will not be able to perform the password authentica- tion correctly. L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)
  • Page 61 SMTP server in your LAN. The SMTP server located outside of your LAN may not be available for security reason. For further information please contact your network administrator (+ p.25). L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)
  • Page 62 What is the MAC address assigned to the projector? The MAC address is displayed in "Network information" menu of the projector (+ p.14) and in "Information" menu through the web browser (+ p.45). L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)
  • Page 63 For further information please consult your local deal- er. The version number of the firmware is indicated on the lower part of the "Initial setting" page. Version of the firmware L2K1000 Network User Manual 020-00395-01 Rev.1 (04-2011)
  • Page 64 Whitefield Road Tokyo, 135-0063 150-872 South Korea Bangalore 560 066 PH: 81-3-3599-7481 PH:+82 2 702 1601 India FX: 81-3-3599-7482 FX: +82 2 702 1602 PH: (080) 41468941 – 48 sales-japan@christiedigital.com FX: (080) 41468949 Built-in Network User Manual for L2K1000 SO-KG2K...
  • Page 66 Corporate offi ces USA – Cypress ph: 714-236-8610 Canada – Kitchener ph: 519-744-8005 Worldwide offi ces United Kingdom Eastern Europe Singapore Japan ph: +44 118 977 8000 ph: +36 (0) 1 47 48 100 ph: +65 6877-8737 ph: 81-3-3599-7481 France Middle East Beijing South Korea...

This manual is also suitable for:

L2k1500

Table of Contents