Projection lens is optional. User Manual Network Supported Refer to the User Manual below for details about network function. □ Network Set-up and Operation □ PJ Network Manager Downloaded From projector-manual.com Christie Manuals...
P in P mode via the projector’s built-in LAN. For details, refer or P by P mode. (pp.57-58) to the user manual “Network Setup and Operation.” Note: • The On-Screen Menu and figures in this manual may differ slightly from the product. • The contents of this manual are subject to change without notice. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Computer Input Source Selection Video Input Source Selection Trademarks Each name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Data Processing Equipment, ANSI/NFPA 75. recycling centre. Please, help us to conserve the environ- READ AND KEEP THIS USER MANUAL FOR ment we live in! LATER USE . Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
DISPOSED OF ACCORDING TO LOCAL, STATE OR fire or electric shock. Never spill liquid of any kind on FEDERAL LAWS. the projector. Do not install the projector near the ventilation duct of air-conditioning equipment. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Do not radiate strong light such as laser light on the projection lens directly, as this may degrade the functionality of the projector, and will void any applicable warranties. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
● Do not touch the lens while it is moving as this could cause injury to the fingers. ● Never allow children to touch the lens. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Do not try to defeat this safety feature. GROUND Should you be unable to insert the plug into the outlet, contact your electrician. THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILy ACCESSIBLE . Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Connect the component or the composite video *Kensington is a registered trademark of ACCO output signal from video equipment to these Brands Corporation. jacks (p.21). Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Enter the focus, zoom, and lens shift adjustment mode (p.27). ⑫ WARNING TEMP . indicator Blink red when the internal temperature of the projector exceeds the operating range (pp.77, 85-87). Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Act as the left mouse button for wireless mouse to moisture or heat. operation (p.31). – For cleaning, use a soft dry cloth. Do not apply benzene, thinner, spray, or any other chemical materials. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Page 16
Act as number buttons. Use these buttons when ㉑ FILTER button setting the remote control codes (p.16) or when Scroll the filter (p.29). entering the PIN code numbers (pp. 23, 56, 66). Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
(16.4’/ 5 m). Connect the remote control and the projector with the remote control cable (sold separately). Connected with the remote control cable, the remote control does not emit wireless signal. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
To correct keystone distortion, press the KEYSTONE button on the remote control or select Keystone from the menu (see pages 14, 30, 45, 52). Adjustable Feet Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Remove the lens from the projector. ]Do not touch the glass part of the lens with your hand. CAUTION Be careful when handling the lens. Do not drop. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Page 20
● Before installing or replacing the lens, check that the Model No. of the Projection Lens matches to the projector. ● For details of the lens and installation, contact the sales dealer where you purchased the projector. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Page 21
3. Check no part is missing, and no mounting part is loose. Some parts are not used for installation or replacement. Keep these parts for later use. Note: • Figures in this manual may differ from the actual product. Screw driver in the lens Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
ANALOG MONITOR G B R H/V V CONTROL HDMI PORT Unplug the power cords of both the See the next page for the signals that can output projector and external equipment to the MONITOR OUT terminal. from the AC outlet before connecting cables. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
For the U .S .A . and Canada For Continental Europe Ground To POWER CORD CONNECTOR on To the AC Outlet. To the AC Outlet. your projector. (120 V AC) (200–240 V AC) Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
If you entered an incorrect PIN code, “PIN code” and the turned off automatically. number () will turn red for a moment. Enter the • The "1234" is set as the initial PIN code correct PIN code all over again. at the factory. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
You can disconnect the power cord from the wall outlet or turn off the breaker even during projection without pressing the ON/STAND-BY button. Note: W hen using the Direct OFF function, you can not restart the projector immediately after the power is disconnected. If the external power supply is suddenly cut off, the fan stops immediately. The lamp remains high temperature and needs to be cooled. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Press the MENU button to exit the On-Screen Menu. On-Screen Menu Point The currently ► or SELECT The selected item is set item is button highlighted in orange. marked. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Lamp status, Lamp counter, Filter counter, Power management, Key lock, PIN code lock, Shutter management, Simple mode, Remote control, and SERIAL NO . (p.28). Network See the user manual of “Network Set-up and Operation”. Guide The key operation is displayed. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
SHUTTER button again. Refer to p.67 for details of setting for the Shutter function. Note: • T he SHUTTER button on the side control and the remote control cannot be effective when Shutter Protection is On in the Setting menu. (p.67) • T he SHUTTER indicator on the projector's top lights blue when the shutter is closed. (pp.12, 85) • T he projector will shut down automatically when the set time on shutter management has passed. (p.67) • T he Power management function does not work when the shutter is closed. (p.63) Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
The information window can also be selected from the menu. Note: • T he H-sync freq. and V-sync freq. values described in the figure may be different from the actual values. • SERIAL NO. is used to service the projector. FOCUS buttons Press the FOCUS buttons on the remote control to adjust focus of the image. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Page 31
Press and hold the PIP button for more than 3 seconds to display the setting dialog box of Picture in Picture. See pages 57-58 for details of Picture in Picture function. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Press the Point Keystone Keystone Keystone ► button Reduce the bottom left Reduce the bottom right corner part with the Point corner part with the Point ►▲ buttons. ◄▲ buttons. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Acts as right (click) mouse mouse button button while the projector while the projector and a computer are and a computer connected with a USB are connected cable. with a USB cable. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
(Green, Blue, Red, Horiz. Sync, and Vert. Sync.)] from the computer to G, B, R, H/HV, and V jacks: When your computer is connected to the INPUT 2 (5 BNC INPUT JACKS) terminal, select RGB. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
When the video input signal is connected y,Pb/Cb,Pr/Cr to the Y-Pb/Cb-Pr/Cr jacks, select y,Pb/ Cb,Pr/Cr . When the video input signal is connected S-video to the S-VIDEO jack, select S-video. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Point ► or the SELECT button. Use the Point ▲▼ buttons to select the desired system and then press the SELECT button. Systems in this dialog box can be selected. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Please wait . . . appears while the Note: Auto PC adjustment is in process. • Fine sync, Total dots, Position H and Position V of certain computers cannot be fully adjusted with the Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required. (pp.37-38) • The Auto PC adjustment cannot be operated when 480i, 575i, 480p, 575p, 720p, 1035i, 1080i or 1080p is selected in the PC System Menu (p.35), or when the signal is coming from the HDMI or DVI-D terminal. • Depending on the condition of signals and the type and length of cables, the signals may not be properly viewed. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Use the Point ◄► buttons to adjust the horizontal area displayed by this projector. Display area V Use the Point ◄► buttons to adjusts the vertical area displayed by this projector. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
575i, 480p, 575p, 720p, 1035i, 1080i or 1080p is this dialog box. data. selected in the PC System Menu (p.35). • W hen input computer signal to the projector, PC adjust function will become available. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
For viewing pictures in a bright room. Standard Normal picture level preset on the projector. Real Picture level with improved halftone for graphics. Image 1–10 User preset picture adjustment in the Image adjust Menu. (pp.40-42) Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
(If you press the MENU button on the side control or the remote control , it returns to the COLOR MANAGEMENT POINTER and you will need to reselect and readjust the color.) Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Point ► button to deepen green tone (from 0 to 63). White balance (Blue) Press the Point ◄ button to lighten blue tone; press the Point ► button to deepen blue tone (from 0 to 63). Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Page 44
A confirmation box appears and then select yes. Stored data can be called up by selecting an Image (1-10) in the A confirmation box appears Image Level Selection on page 39. and then select yes. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
When adjusted, the arrows will turn red. When reaching initial mode. to the correction limits, the arrows will disappear. • Full, Zoom, True, Custom adj. and Digital zoom +/– cannot be selected Custom when no signal is detected in the PC Provide the last stored aspect screen image. System Menu. (p.35) Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Page 46
Screen Size Adjustment Menu or select when True is selected. an input source from the Input Source Selection Menu • Digital zoom – cannot be operated (see pages 32-34) again or adjust the screen size with the D.ZOOM button. when Custom is selected. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
This function returns all adjusted values to the factory default settings. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at yes. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
If the projector cannot reproduce proper video image, select a specific component video signal format from among 480i, 575i, 480p, 575p, 720p, 1035i, 1080i, and 1080p. Note: The AV System Menu cannot be selected when selecting RGB (Scart). Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Normal picture level preset on the projector. Natural Natural picture level preset on the projector. Cinema Picture level adjusted with fine tone. Image 1–10 User preset picture adjustment in the Image adjust Menu. (p.48-50) Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
White balance (Blue) Press the Point ◄ button to lighten blue tone; press the Point ► button to deepen blue tone (from 0 to 63). Note: • When White balance Red, Green or Blue is adjusted, the Color temp. level will change to Adj.. • Tint cannot be selected when the video system is PAL, SECAM, PAL-M or PAL-N (p.46). Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
(from 0 to 31). Gamma Use the Point ◄► buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15). Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Page 52
(1-10) in the Image Mode Selection on page 47. Note: • Progressive cannot be selected when 480p, 575p, 720p, or 1080p is selected (p.46). • Noise reduction cannot be selected with the computer input and when the video signal format is 1080p (p.46). A confirmation box appears and then select yes. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Reset………… Reset all the adjusted values. Press is selected on AV System Menu the SELECT button at Reset to (p.46). display a confirmation box. To reset, press the SELECT button at yes. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Page 54
This function returns all adjusted values to the factory default settings. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at yes. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
ON button on the is in progress, Input search will stop remote control. and go back to the previous input – When pressing the INPUT button on the signal. remote control or on the side control. – When no signal is detected. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Page 56
This function decides on the starting-up display from among following options. Off ..Show the countdown display only. User ..Show the image you capture. Default .. Show the factory-set logo. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
SELECT button and the Logo PIN code dialog box appears. Enter a Logo PIN code by following the steps below. The initial Logo PIN code is set to "4321" at the factory. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Page 58
THE LOGO PIN CODE NO . MEMO ON PAGE 93, AND KEEP IT SECURELy . SHOULD THE LOGO PIN CODE BE LOST OR FORGOTTEN, THE LOGO PIN CODE SETTING CAN NO LONGER BE CHANGED . Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
INPUT button on the • When the input signal(s) is/are side control or INPUT 1/2/3 button on the remote control. incompatible, X mark will be displayed Operation on the On Screen Menu is not necessary. for 10 seconds on the Main/Sub picture. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Page 60
Then Return to factory default of Edge Blending? message appears . To reset, press the SELECT button at yes. Back ..... Hides the Edge blending setting menu and returns to the Setting menu. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
SELECT button at Yes to reset to the previously stored values. Store ...... Select Store and press the SELECT button to display the Confirmation box. To store adjusted data, select yes. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Normal ..When the output of video equipment is set to equipment. For details, refer to the to “STANDARD.” manual of video equipment. Enhanced ..When the output of video equipment is set to “ENHANCED.” Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Max ..Use this mode when you want to increase the cooling effect when operating the projector in high ambient temperature environment. Fan noise is louder than Normal. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Page 64
Operating Range” on page 15 for details. Both ..Activate both the front and back receiver. Front ... Activate only the front receiver. Back ..Activate only the back receiver. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
When this function is set to On, the projector will be automatically turned on just by connecting the AC power cord to the wall outlet. Note: Be sure to turn off the projector properly (see “Turning Off the Projector” on page 24). If the projector is turned off in the incorrect sequence, the Direct on function does not work properly. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Page 66
Stop or Cancel the P-timer via Remote Control To stop the P-timer, press the P-TIMER button. To cancel the P-timer, press and hold the P-TIMER button for a few seconds. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
PIN code. The "1234" is set as the initial PIN code at the factory. If you want to change the PIN code lock setting, Press the SELECT button and the PIN code dialog box appears. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Page 68
OF THE PIN CODE NO . MEMO ON PAGE 93, AND KEEP IT SECURELy . IF yOU FORGET yOUR PIN CODE, THE PROjECTOR CAN NO LONGER BE STARTED . Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
LAMP/SHUTTER indicator keeps blinking. Should the ON / STAND-BY button be pressed in this condition, the projection lamp will be turned on and the LAMP/SHUTTER indicator turns off. Note: T he Shutter Management function cannot be halted. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
- T he following functions are not available respectively when Video delay control is set to Low/Mid/High. Low ... K eystone can not be selected. Mid ... P rogressive and Noise reduction can not Fig .1 be selected. High ... K eystone, Progressive and Noise reduction can not be selected. - W hen Video delay control function is set to Low Video delay : On or High and press the KEYSTONE button on the remote control, Fig.1 will be displayed on the bottom left screen about for 4 seconds. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Lamp counter reset Select yes in the confirmation box if you want to reset the lamp counter, and then choose yes in the second confirmation box to reset lamp counter. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Factory default appear when the Display function is This function returns all setting values except for User set to Off (p.54) or during “Freeze” logo, PIN code lock, Logo PIN code lock and Filter (p.29). counter to the factory default settings. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
• The filter can be scrolled 9 times since in the filter reset the filter counter and the scroll counter, cartridge there are 10 scrolls in total. the projector cannot recognize the correct • The filter cartridge is disposable. Do not clean and number of remaining scrolls and may cause a reuse the filter cartridge. breakdown. • Do not expose the filter cartridge to water or liquid, or it • I f you continue to use the projector without may cause a breakdown. replacing the air filter cartridge and resetting • Replace the filter cartridge after all the scrolls are used the filter counter after the filter cartridge up. If you replace the filter cartridge when there are replacement icon is displayed, the power will some scrolls left in the filter cartridge, the filter counter switch off automatically approximately 10 and the scroll counter do not recognize the correct hours after projection starts in order to protect number of remaining scrolls and the reset function the optical parts. After this, the power will cannot work properly. It may cause a breakdown. switch off automatically 3 minutes after it is • Do not use the filter cartridge with other projector. turned back on and projection starts. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
When ordering, give the following information to the dealer. ● Model No . of your projector LHD700 ● Replacement Filter Cartridge Type No . 003-003965-01 (Service Parts No. 610 342 9571) Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Another confirmation dialog box appears, select yes to reset the Scroll counter. Scroll counter Reset? appears. Select yes, then another confirmation box appears. Select yes again to reset the Scroll counter. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Allow a projector to cool for at least 45 minutes before or touch the glass bulb! The glass can you open the lamp cover. The inside of the projector can shatter and may cause injury. become very hot. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Replacement lamp can be ordered through your dealer. When ordering, give the following information to the dealer. ● Model No . of your projector LHD700 ● Replacement Lamp Type No . 003-120641-01 (Service Parts No.610 357 0464) Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
In addition, there is a risk that the internal parts may be damaged not only by the flammable air spray but also by the cold air. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual...
. DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED UNDER AN ABNORMAL CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC SHOCK. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
– Make sure that the shutter is opened. (pp.27, 67) – End of lamp life is approaching. Replace the lamp with a new one promptly. (See page 74) appears on the screen Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
– Each of the Video Input and Computer Input has a limit on selectable menus. be selected . The shutter does not – Check "Protection" or "Release key" of the Shutter function. (See p.67) work . Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Page 82
If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the problem. We will advise you how to obtain service. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
0–63 0–63 Green Mode 10 0–63 Blue Red/Green/Blue Offset Off/L1/L2 Auto picture control Auto/Off Advanced color 0–31 Sharpness 0–15 Gamma Yes/No Reset Image 1 Store Note: Image 10 The Menu display varies depending on the input signal. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Page 84
H / V H & V On/Off Position H / V Common Reset Standard Keystone Corner correction Note: Corner pattern The Menu display varies depending on Store the input signal. Ceiling On/Off Rear On/Off Screen aspect Default(16:9)/16:10/4:3 Reset Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Lamp control Auto/Normal/Eco 1/Eco 2 Filter control Yes/No Fan control Normal/Max Simple mode On/Off Remote Control Code 1~Code 8 RC sensor Both/Front/Back Power management Ready 1 Ready 2 Shut down Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
• • • blinking slow (approx. 2 seconds • • • dim • • • off ON, 2 seconds OFF) • • • dim (red) • • • Differ according to conditions. ❖ Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Page 88
When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights orange. When this indicator lights orange, replace the projection lamp with a new one promptly (p.74). Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
the cooling mode.) The shutter is out of control. (The projector is in the stand-by mode.) In that case, contact the ❊ service center immediately. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Underwriters Laboratories Inc. It Community (EC). is designed and manufactured to Licensed under USP 5,717,422 USP 6,816,141 meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
● LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual...
For the lens replacement and lens installation, refer to the installation manual of the optional lens. Before replacing and installing the lens, make sure that you are using the lens with the correct Type No. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual...
CONTROL PORT CONNECTOR (D-sub 9 pin) LAN TERMINAL Serial ----- R X D TX + ----- T X D TX – RX – ----- RX + ----- ----- ----- ----- ----- ----- ----- Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
While the projector is locked with the PIN code... Put the label below (supplied) on in a prominent place of the projector’s body while it is locked with a PIN code. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Enter with ASCII 64-byte capital then enter the "Enter" key. characters and one-byte characters. Example When you want to change the input to INPUT 2, Type 'C' '0' '6' 'Enter'. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Page 98
Select Input 2 RGB Direct on ON Keystone UP Keystone DOWN Direct on OFF Keystone RIGHT Select Input 3 Video Select Input 3 S-video Keystone LEFT Select Input 3 Y, Pb/Cb,Pr/Cr Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Communication failure The tables on page 96 and 97 show the typical command lists for controlling the projector. Please consult your local dealer for further information of other commands. Downloaded From projector-manual.com Christie Manuals LHD700 User Manual 020-000422-01 Rev.1 (11-2011)
Page 100
Americas Canada Chile Christie Digital Systems USA, Inc. Christie Digital Systems Canada, Inc. Representative Office Christie Digital Systems USA, Inc. 10550 Camden Drive 809 Wellington St. N. Cypress CA 90630 Kitchener, Ontario N2G 4Y7 Av. Pedro Fontova 7619 of 60...
Page 101
Downloaded From projector-manual.com Christie Manuals...
Page 102
+86 10 6561 0240 ph: +82 2 702 1601 Germany Spain Shanghai ph: +49 2161 664540 ph: + 34 91 633 9990 ph: +86 21 6278 7708 For the most current technical documentation, Downloaded From projector-manual.com Christie Manuals please visit www.christiedigital.com...