Installation - ATEN CL1000N User Manual

Installation

Refer to the installation diagram as you perform the installation steps. The
numbers in the diagrams correspond to the numbers of the steps.
1. Plug the SPHD connector end of the KVM cable provided with this unit
into the CL1000N's KVM port.
2. Plug the keyboard, monitor, and mouse connectors of the KVM cable
provided with this unit, into the 5 in 1 console cable that connects to the
console section of the KVM switch.
Note:
Supports PS/2 or USB KVM switches
Supports computers with PS/2 or USB keyboard and mice
3. Plug the power cord into the CL1000N's power socket and into an AC
power source to power up your KVM LCD console.
4. Power up your KVM installation.
3
1
e.g., CS1716A
4
2
Chapter 2. Hardware Setup
9