ATEN CL1000N User Manual page 33

2. Attach the left and right easy-installation mounting rails to the inside of
the rack. The flange that supports the console will be to the inside.
Front Flang Front Flang
Left Rail Left Rail
a) Screw the front flanges to the rack first.
b) Slide the bars with the rear flanges toward the rack until the flanges
make contact with the rack, then screw the rear flanges to the rack.
Rear Flang Rear Flang
Slide bar Slide bar
Support Flang Support Flang
Right Rail Right Rail
Rear Attachment Rear Attachment
Sliding Bracket Sliding Bracket
(Continues on next page.)
Appendix
23