Basic Operation - Icom IC-F9511S Instruction Manual

2

BASIC OPERATION

e Push [P0] several times to select the appropriate item.
Then, push [Up] or [Down] or rotate [DIAL]* to set the de-
sired level/condition.
• Available set mode functions are Backlight, LCD Contrast,
Beep, Beep Level, Ringer Level, SQL Level, AF Min. Level,
Mic Gain, Horn, Battery Voltage, Signal Moni, Lone Worker
and System Information.
[P0]
r Push [ ] again to exit set mode.
User set mode is also available using a programmable key.
Refer to p. 6 [User Set Mode] section.
[User Set Mode] allows for quick item selection. Set "Enable"
for the often used items with the CS-F9010/F9510
. Ask your dealer for details.
software
NOTE: While in the user set mode, [P0], [Up], [Down] and
[DIAL]* activate regardless of the assigned functions.
*Simple type only
13
[Up]/[Down] or [DIAL]
[ ]
cloning