Configuring A Server Behind Sua - ZyXEL Communications Prestige 642 User Manual

Prestige 642 ADSL Internet Access Router
In addition to the servers for specific services, SUA supports a default server. A service request that does not
have a server explicitly designated for it is forwarded to the default server. If the default server is not
defined, the service request is simply discarded.
To make a server visible to the outside world, specify the port number of the service and the inside IP address
of the server in Menu 15 - Multiple Server Configuration.

3.15.1 Configuring a Server behind SUA

Follow the steps below to configure a server behind SUA:
1. Enter 15 in the main menu to go to Menu 15 - Multiple Server Configuration.
2. Enter an index number in menu 15 to go to Menu 15.1 - SUA Server Configuration.
3. Enter the service port number in the Port # field and the inside IP address of the server in the IP Address
field.
4. Press ENTER at the "Press ENTER to confirm ..." prompt to save your configuration after you define
all the servers or press ESC at any time to cancel.
3-14
Figure 3-8 Single User Account Topology
Internet Access