Ftp File Transfer - ZyXEL Communications Prestige 642 User Manual

Prestige 642 ADSL Internet Access Router
Send/Fetch
Local File
Remote File
Binary
Abort
TFTP over WAN will not work if:
1. You have applied a filter in Menu 3.1 (LAN) or in Menu 11.5 (WAN) to block Telnet service.
2. You have an SMT console session running.

10.9 FTP File Transfer

In addition to uploading the firmware and configuration via the console port and TFTP client, you can also
upload the Prestige firmware and configuration files using FTP. To use this feature, your workstation must
have an FTP client.
When you telnet into the Prestige, you will see the following screens for uploading firmware and the
configuration file using FTP.
10-16
Press "Send" to upload the file to the Prestige and "Fetch" to
back up the file on your computer.
Enter the path and name of the firmware file (*.bin
extension) or configuration file (*.rom extension) on your
computer.
This is the filename on the Prestige. The filename for the
firmware is "ras" and for the configuration file, is "rom-0".
Transfer the file in binary mode.
Stop transfer of the file.
System Maintenance