LifeSpan Dymo Owner's Manual page 7

STEP 1:
STEP 2:
STEP 3:
DYMO
1. Open the carton
2. Extract the parts listed above
3. Place the Main Frame (#1) onto level
ground
1. Whilst holding the display frame, use the
Allen Key Wrench to lock the base
2. Secure upright tube by tightening screw
M8*16 (#51) and Lock Washer (#64）
3. Left side assembly method same as
right side
PLEASE NOTE: BE CAREFUL NOT TO CUT
OUTSTANDING WIRES UNDERNEATH
HANDLES BELOW THE DISPLAY
1. Using the Allen Key Wrench (#12),
attach the screw M8*45 (#70) and Lock
Washer (#64) to the base frame
through the base and right upright tube
2. Repeat for the left upright tube
Note: Support the upright with your hand to
prevent it falling down and causing injury.
7