Trouble Shooting Guide - LifeSpan Dymo Owner's Manual

36 Computer shrouding
37 Screw
38 Computer

12. TROUBLE SHOOTING GUIDE

Fault Code Main reason
E01 The wire from treadmill display to
bottom control board is not
connected
E02 Protect the exploding
E05 Over current Protection
E06 Control board self-checking
E08 EEPROM damage
DYMO
1
ST4.2*20 4
1
Solution
1． Check the connection wire between
2． Ensure the IC on the control board was
3． Abnormal power supply in control board.
1． Bad contact with motor open circuit.
2． Power tube was puncture. Please
1． Overloaded
2． Running board experiencing heavy
3． Damage to motor, replace motor.
Change the control board
24
Computer face
74
sticker
Computer circuit
75
board
76 Screw
computer and control board was well
connected.
well inserted.
Please replace control board.
Please change a new motor or check the
connector.
change a new Power tube or control
board.
resistance and needs to be oiled
1
1
ST2.9*6.5 12