Transmitting A Fixed Text With Added Digits - Funkwerk FC4 Operating Manual

Transmitting a message

Transmitting a fixed text with added digits

messages, then
GB
Press the [Star] key. The display reads «1234*».
Ü
«1234*78».
Press the [Star] key. The display shows the fixed text, e.g.
Ü
«1234*Meeting in room».
( You can make corrections and enter another number for another
fixed text with the left softkey.)
Press the [Star] key.
Ü
fixed text followed by the added digits, e.g. «1234*Meeting in
room 109».
Press the [Hash] key. The display briefly reads «Message is
transmitted».
Performance check
If transmission was successful, the display reads «POS Meeting ...» after
a short time.
When the user sends a negative acknowledgement or cannot be reached,
the display reads «NEG Meeting ...» after a short time.
If the user is not known or has failed to react to a message with a request
for manual acknowledgement, the display reads «??? Meeting ...» after a
short time.
86
Messaging on Secury Server and Mobility Server I 33 / CS I55
Call up Menu > Message lists > Outgoing
Enter the receiver number.
Enter the number of the fixed text, e.g. 78. The display reads
Add the desired digits, e.g. 109. The display shows the