Security; Pin (Enter A New Pin); Key Lock (Automatic) - Funkwerk FC4 Operating Manual

FC4 / FC4 Ex (HS) connected with Mobility Server

Security

PIN (enter a new PIN)

....... Call up the «PIN» entry.
... Enter the current PIN with the number keys. In the factory
settings, the PIN is «0000». Accept the new setting with the right
softkey [OK]. The display continues to the entry field for the new
PIN.
... Enter the new PIN with the number keys and accept it with the
right softkey [OK]. The display continues to the entry field for
repeating the new PIN.
... Repeat the new PIN with the number keys and accept it with the
right softkey [OK]. The display goes back to the «PIN» entry.
The current PIN including the factory settings PIN is always
requested when a locked handset is to be unlocked again.
If the current PIN is different from the one entered in the factory
settings, you have to enter the current PIN even when you wish to
delete a list, e.g. the call list.

Key lock (automatic)

....... Call up the «Key lock» entry.
Activate or deactivate the automatic key lock with the right softkey
[Change] (Checkbox
After you have activated the key lock:
or Using the Up or Down arrow of the selector key, select the radio
button with the time after which the automatic key lock is to be
activated.
Call up Menu > Setup > Security, then
Call up Menu > Setup > Security, then
or ).
GB
75