FC4 / FC4 Ex (HS) connected with Mobility Server
Extras
Alarm clock
Setting the alarm clock function ...
....... Call up the «Alarm clock» entry.
or
Using the Up and Down arrows of the selector key, select the
«active» entry.
Activate or deactivate the alarm clock function with the right softkey
[Change] (Checkbox
or
Using the Up and Down arrows of the selector key, select the
wake time entry field «Alarm time».
... Using the number keys, enter four digits (2-digit hours and 2-digit
minutes).
If an error occurred during the entry, change the selection
temporarily with the Up and Down arrows of the selector key, e.g.
for the «Active» entry, and then back to «Alarm time». Repeat the
«Alarm time» entry.
or
Using the Up and Down arrows of the selector key, select the
«Alarm signal».
Open the «Alarm signal» select list with the right softkey [Change].
or
Using the Up and Down arrows of the selector key, select the
new wake-up melody.
Accept the selection with the right softkey [OK].
Call up Menu > Setup > Extras, then
or
).
GB
77