Funkwerk FC4 Operating Manual page 20

Putting the FC4 into operation
Setting up the charger
Place the charger on a solid, level surface, e.g. on a table. Choose a
location that is protected against direct sunlight and moisture.
• Plug the small connector of the
connecting cord into the charger at the
rear.
GB
• Connect the plug-in power supply unit with
a socket outlet.
The Desktop Charger DC4 Plus with
spare battery charging option may be
used only with a more powerful plug-
in power supply unit, part no.
59 0060 2814!
The charger is now ready for operation.
Charging the business handset
Place the handset into the charger. You hear a confirmation tone provided
this feature has been activated in the "Phone settings > Audio settings >
Tones > In charger". The keyboard illumination lights up for a short time
provided this feature has been activated in the "Phone settings > Display
settings > Illumination > Keyboard".
The handset switches itself on when it has been switched off before being
placed in the charger.
The battery symbol in the symbol line will be moving until the battery is
fully charged. The batteries heat up slightly during the charging process.
This is quite normal.
As soon as the battery is fully charged, charge retention starts. A fully
charged battery is indicated by a green "Battery charged" symbol with a
flashing frame.
Charging the spare battery
A bay which can be closed with a cover and which is intended for charging
a spare battery is provided on the rear of the Desktop Charger DC4 Plus.
Place a battery with a contact faces facing the charger housing into the
bay and press it gently against the contact springs in the bay.
20
FC4 / FC4 Ex (HS) connected with Mobility Server
Charger