System Settings; Log In - Funkwerk FC4 Operating Manual

FC4 / FC4 Ex (HS) connected with Mobility Server

System Settings

Log in

....... Call up the «Log in» entry.
or Using the Up and Down arrows of the selector key, select a
radio button «System 1» to «System 10». Confirm the selection with
the right softkey [OK].
or Using the Up and Down arrows of the selector key, select the
radio button «I55». Confirm the selection with the right softkey [OK].
... Enter the PARK (Portable Access Rights Key) with the number
keys if one exists. Confirm with the right softkey [OK].
... Using the number keys, enter the 8-digit AC code (Access code of
telephone system). Confirm with the right softkey [OK].
Logging a handset in to a Mobility Server (I55) is a precondition for
checking in to this system.
A handset can be logged in to several Mobility Servers, e.g. at
different locations, but can be checked in to and used with only one
Mobility Server at a time.
For a handset not yet logged in to a Mobility Server so far, the
entries «System 1» to «System 10» are available.
For logging in, the handset must be within the radio coverage of the
telephone system.
The PARK code and the AC code can be obtained from your system
administrator.
You have two minutes max. available for the log-in procedure.
Call up Menu > Setup > System settings, then
GB
71