Funkwerk FC4 Operating Manual page 15

FC4 / FC4 Ex (HS) connected with Mobility Server
Introduction
Advice on the place of installation
Use an anti-slip pad for your charger, especially on new or polish-treated
furniture. Varnishes or polishes may contain substances that soften the
base of your charger. The softened base can leave unwanted spots on
furniture surfaces. Funkwerk Enterprise Communications GmbH will not be
liable for such damage.
Information for operation
• Switch the unit off if the use of mobile phones is not allowed at your
whereabouts, e.g. near medical equipment and facilities. Observe
corresponding bans!
• Check the battery charge symbol from time to time. Place the handset
into the charger as soon as the empty battery charge indicator starts
flashing and indicates an exhausted battery.
• Observe and follow the safety instructions for the normal version and for
the explosion-proof version of the handset provided in this operating
manual.
Emission of radio signals
The unit meets EC requirements on the emission of radio signals.
As any mobile phone, your business handset is a transmitter and receiver
of radio signals.
The transmitter is designed so that the high-frequency (HF) energy
threshold values recommended by the Council of the European Union will
not be exceeded.
These threshold values are part of comprehensive guidelines defining
allowed HF energy values for the general public. These guidelines were
prepared by independent scientific organisations, using regular and
thorough evaluation of scientific studies.
These guidelines include a substantial safety margin that is to guarantee
the security of persons of any age and health condition.
GB
15