Figure 77: Target Settings - SMC Networks SMCWBR14S-N5 User Manual

Figure 77: Target Settings

Target Description - Here displays the description about the target
◆
and this description is unique.
Information - The target can be IP address, port, or domain name.
◆
Modify - To modify or delete an existing entry.
◆
To add a new entry, follow the steps below.
Click the "Add New" button.
1.
In Mode field, select IP Address or Domain Name.
2.
If you select IP Address, the screen in
a.
In Target Description field, create a unique description for the
●
target (e.g. Target_1).
In IP Address field, enter the IP address of the target.
●
Select a common service from Common Service Port drop-down
●
list, so that the Target Port will be automatically filled. If the
Common Service Port drop-down list doesn't have the service
you want, specify the Target Port manually.
In Protocol field, select TCP, UDP, ICMP or ALL.
●
If you select Domain Name, the screen in
b.
In Target Description field, create a unique description for the
●
target (e.g. Target_1).
In Domain Name field, enter the domain name, either the full
●
name or the keywords (for example google) in the blank. Any
domain name with keywords in it (www.google.com,
www.google.cn) will be blocked or allowed. You can enter 4
domain names.
Click the Save button.
3.
Click the Delete All button to delete all the entries in the table.
– 88 –
| Configuring the Router
C 4
HAPTER
Access Control
Figure 78 is shown.
Figure 79 is shown.