Figure 12: Quick Setup - Wireless - SMC Networks SMCWBR14S-N5 User Manual

Secondary DNS - If your ISP provides another DNS server,
●
enter it into this field.
Click Next to continue. The Wireless settings page will appear, as shown
5.
in Figure 12.
Figure 12: Quick Setup – Wireless
Wireless Radio - Enable or disable the wireless radio choosing
■
from the pull-down list.
SSID - Enter a value of up to 32 characters. The same name of
■
SSID (Service Set Identification) must be assigned to all wireless
devices in your network. Considering your wireless network
security, the default SSID is set to "SMC". This value is case-
sensitive. For example, "TEST" is NOT the same as "test".
Region - Select your region from the pull-down list. This field
■
specifies the region where the wireless function of the Router can be
used. It may be illegal to use the wireless function of the Router in a
region other than one of those specified in this field. If your country
or region is not listed, contact your local government agency for
assistance.
Channel - This field determines which operating frequency will be
■
used. The default channel is set to Auto, so the AP will choose the
best channel automatically. It is not necessary to change the
wireless channel unless you notice interference problems with
another nearby access point.
– 35 –
| Quick Installation Guide
C 3
HAPTER
Quick Installation Guide