I Want To Use Netmeeting, What Do I Need To Do; Figure 115: Virtual Servers; Figure 116: Add Or Modify A Virtual Server Entry - SMC Networks SMCWBR14S-N5 User Manual

I N
WANT TO USE ETMEETING
, I
WHAT DO NEED TO DO
If you start Netmeeting as a host, you do not need to change anything
1.
on the Router.
If you start as a response, you need to configure a Virtual Server or
2.
DMZ Host, and make sure the H323 ALG is enabled.
Configure a Virtual Server:
3.
Log in to the Router, click "Forwarding" on the menu, and then click
a.
"Virtual Servers" on the submenu.
On the "Virtual Servers" page, click "Add New".
b.
On the "Add or Modify a Virtual Server Entry" page, enter "1720" for
c.
the "Service Port".
Enter your IP address in the "IP Address" field (for example,
d.
192.168.2.169).
Set to Enable and then Save.
e.

Figure 115: Virtual Servers

Figure 116: Add or Modify a Virtual Server Entry

– 120 –

I want to use Netmeeting, what do I need to do?

?
| FAQ
A B
PPENDIX