Figure 24: WAN-L2TP
User Name/Password - Enter the User Name and Password provided
◆
by your ISP. These fields are case-sensitive.
Dynamic IP/ Static IP - Choose either as you are given by your ISP.
◆
Click the Connect button to connect immediately. Click the Disconnect
button to disconnect immediately.
Connect on Demand - You can configure the Router to disconnect
◆
from your Internet connection after a specified period of inactivity
(Max Idle Time). If your Internet connection has been terminated due
to inactivity, Connect on Demand enables the Router to automatically
re-establish your connection as soon as you attempt to access the
Internet again. If you wish to activate Connect on Demand, click the
radio button. If you want your Internet connection to remain active at
all times, enter 0 in the Max Idle Time field. Otherwise, enter the
number of minutes you want to have elapsed before your Internet
connection terminates.
Connect Automatically - Connect automatically after the Router is
◆
disconnected. To use this option, click the radio button.
– 47 –
| Configuring the Router
C
4
HAPTER
Network