B
PIN
Y
If the new device supports Wi-Fi Protected Setup and the PIN method, you
can add it to the network by PIN with the following two methods.
Method One: Enter the PIN into my Router.
Keep the default WPS Status as Enabled and click the "Add device"
1.
button in
Figure
45, then the following screen will appear.
Figure 55: Add Device
Select "Enter the new device's PIN" and enter the PIN code of the
2.
wireless adapter in the field after PIN, as shown in the figure above.
Then click Connect.
The PIN code of the adapter is always displayed on the WPS
N
:
OTE
configuration screen.
For the configuration of the wireless adapter, selected "Enter a PIN into
3.
my access point or a registrar" in the WPS configuration, as below, and
click Next.
– 70 –
| Configuring the Router
C
4
HAPTER
Wireless