Troubleshooting - pro.point 8439630 User Manual

8439630
LUBRICATION
Only use the lubricants supplied with the tool or specified by the
manufacturer. Other lubricants may not be suitable and may damage the
tool or cause a malfunction during use.
STORAGE
When not in use for an extended period, apply a thin coat of lubricant
to the steel parts to avoid rust. Remove the lubricant before using the
tool again.
DISPOSING OF THE TOOL
If your tool has become damaged beyond repair, do not throw it out. Bring
it to the appropriate recycling facility.
TROUBLE SHOOTING
Problem(s)
Metal cutting saw
will not start.
Visit www.princessauto.com for more information
7-1/4 in. Metal Cutting Circular Saw
Possible Cause(s)
No supply of power.
Brushes have worn or
are sticking.
The trigger switch
is faulty.
Motor components are
worn or short-circuited.
The cord is damaged.
Suggested Solution(s)
Check that the power cable is
properly connected and that
there is power at the outlet.
Disconnect the power, remove
the brush caps and ensure that
the brushes move freely in the
holders. Check whether the
brushes require replacing.
Replace the trigger switch.
Replace defective components.
Replace the power cord.
V 2.7
19