Vibration Precautions - pro.point 8439630 User Manual

8439630

VIBRATION PRECAUTIONS

This tool vibrates during use. Repeated or long-term exposure to vibration
may cause temporary or permanent physical injury, particularly to the
hands, arms and shoulders.
1. Anyone using vibrating tools regularly or for an extended period
should first be examined by a doctor and then have regular medical
check-ups to ensure medical problems are not being caused by
or worsened from tool use. Pregnant women or people who have
impaired blood circulation to the hands, past hand injuries, nervous
system disorders, diabetes or Raynaud's Disease should not use this
tool. If you feel any medical symptoms related to vibrations (such as
tingling, numbness, and white or blue fingers), seek medical attention
as soon as possible.
2. Do not smoke during use. Nicotine reduces the blood flow to the
hands and fingers, increasing the risk of vibration-related injury.
3. Wear suitable gloves to reduce the vibration effects on the user.
4. Use tools with the lowest amount of vibration when there is a choice
between different processes.
5. Do not use for extended periods. Take frequent breaks when using
this tool.
6. Let the tool do the work. Grip the tool as lightly as possible (while
still keeping safe control of it).
7. To reduce vibrations, maintain the tool as explained in this manual. If
abnormal vibrations occur, stop using this tool immediately.
TOOL USE AND CARE
WARNING! Do not use the tool if the throttle does not function properly.
Any tool that cannot be controlled with the ON / OFF switch is dangerous
and must be repaired.
1. Use the correct tool for the job. Maximise performance and safety by
using the tool for its intended task.
2. Do not modify this tool or use for a purpose for which it was
not designed.
3. This tool was designed for a specific function.
Do Not:
a. Modify or alter the tool, all parts and accessories are designed
with built-in safety features that may be compromised
if altered.
b. Use the tool in a way for which it was not designed.
4. Avoid unintentional starts. Be sure the throttle is in the OFF position
when not in use and before connecting it to any power source.
5. Remove adjusting keys and wrenches. Check that keys and adjusting
wrenches are removed from the tool before connecting it. A wrench
or key that is left attached to a rotating part of the tool increases the
risk of personal injury.
Visit www.princessauto.com for more information
7-1/4 in. Metal Cutting Circular Saw V 2.7
9