Troubleshooting - pro.point bd4600 User Manual

8436776
TROUBLE SHOOTING
If the tool does not function properly or if it is missing parts, contact Princess Auto Ltd. for a solution. If unable to do so,
have a qualified technician service the tool.
Problem(s)
Tool runs at normal speed but
loses power under load.
The machine does not work.
Cutting wheel is dry.
Blade wobbles or vibrates
without load.
12
7 in. Portable Tile Saw
Possible cause(s)
Motor parts worn.
Too much force being applied
to tool.
The power supply source is
being interrupted.
Water basin is low or empty.
Loose Clamps.
Block Screw stripped/damaged.
Suggested solution(s)
Repair required.
Move tile forward slowly, letting the tool do the
cutting work.
• Check power supply cord connection.
• Check circuit breaker for power line.
• Check ON-OFF switch.
• Plug into power supply without using
extension cord or use shorter
extension cord.
Refill water basin.
Reseat cutting blade and tighten clamp.
Repair by qualified technician.
For technical questions call: 1-800-665-8685
V 2.0