Cutting Depth Adjustment; Operation; Trigger Switch - pro.point 8439630 User Manual

V 2.7
the guide ruler (A) and back base
to the zero position (B). The laser
needs to be close to the U-shaped
gap (C), which is located close to
guide ruler. See Figure 12.
CUTTING DEPTH
ADJUSTMENT
1. Loosen and pull up the lock lever
(A). See Figure 13.
2. Lift the back of the saw away
from the baseplate until the
approximate depth is achieved.
3. Tighten the lock lever (A) securely
after the depth adjustment level is
reached. See Figure 14.
NOTE: If necessary, you can adjust
the lock and unlock positions by
simply pulling the lever towards
the handgrip of the saw, and
rotating it slightly as required.
WARNING! Cutting with a loose lock
lever may cause serious injury.

OPERATION

TRIGGER SWITCH

Press the trigger switch safety button
(A) first and then pull the trigger (B) to
start the blade rotating. To stop rotating,
release the trigger. See Figure 15.
14
7-1/4 in. Metal Cutting Circular Saw
For technical questions call 1-800-665-8685
8439630
Fig.12
Fig.13
Fig.14
Fig.15