Work Area; Personal Safety - pro.point 8439630 User Manual

8439630
WARNING! The warnings, cautions and instructions discussed in this
instruction manual cannot cover all possible conditions and situations that
may occur. Common sense and caution are factors that cannot be built
into this product, but must be supplied by the operator.
NOTE: Keep this manual for safety warnings, precautions, operating,
inspection and maintenance instructions.

WORK AREA

1. Operate in a safe work environment. Keep your work area clean and
well lit.
2. Do not use in the presence of flammable gases or liquids.
3. Keep anyone not wearing the appropriate safety equipment away
from the work area.
4. Minimize distractions in the work environment. Distractions can
cause you to lose control of the tool.
5. Store tools properly in a safe and dry location to prevent rust
or damage.
6. Always lock up tools and keep them out of the reach of children.

PERSONAL SAFETY

CAUTION! Wear protective equipment approved by the Canadian
Standards Association (CSA) or American National Standards Institute
(ANSI) when using the tool.
1. Dress properly, wear protective equipment. Use breathing, ear, eye,
face, foot, hand, and head protection. Always wear ANSI approved
impact safety goggles, which must provide both frontal and side
protection. Protect your hands with suitable gloves. Wear a full
face shield if your work creates metal filings or wood chips. Protect
your head from falling objects by wearing a hard hat. Wear an ANSI
approved dust mask or respirator when working around metal,
wood and chemical dusts and mists. Wear ANSI approved earplugs.
Protective, electrically non-conductive clothes and non-skid footwear
are recommended when working. Wear steel-toed boots to prevent
injury from falling objects.
2. Control the tool, personal movement and the work environment to
avoid personal injury or damage to the tool. Stay alert, watch what
you are doing and use your common sense.
3. Keep articles of clothing, jewellery, hair, etc., away from moving parts
to avoid entanglement with tool.
4. Do not operate any machine / tool when tired or under the influence
of drugs, alcohol or medications.
5. Do not overreach when operating a tool. Proper footing and balance
enables better control of a tool in unexpected situations.
Visit www.princessauto.com for more information
7-1/4 in. Metal Cutting Circular Saw V 2.7
3