Electrical Safety - pro.point 8439630 User Manual

8439630
16. Do not use the tool on any material containing asbestos.
17. Avoid cutting nails. Inspect the work piece for any nails and remove
before cutting.
18. Do not touch the blade or the surface that has been cut with this
tool immediately after use. The surface will be hot and may cause
an injury.

ELECTRICAL SAFETY

1. Disconnect power supply. Disconnect the tool from the power supply
when not in use, before cleaning, servicing or changing any parts.
2. Protect yourself against electric shocks when working on electrical
equipment. Avoid body contact with grounded surfaces such
as pipes, radiators, cooking stoves and refrigerators. There is an
increased chance of electrical shock if your body is grounded.
3. Double insulated tools are equipped with a polarized plug (one
blade is wider than the other.) This plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician to install
a polarized outlet. Do not change the plug in any way. Double
insulation eliminates the need for a three wire grounded power cord
and grounded power supply system.
4. Grounded tools must be plugged into an outlet that is properly
installed and grounded in accordance with all codes and ordinances.
Never remove the grounding prong or modify the plug in any way.
Do not use any adapter plugs. Check with a qualified electrician if
you are in doubt as to whether the outlet is properly grounded. If
the tool should electronically malfunction or break down, grounding
provides a low resistance path to carry electricity away from the user.
5. Do not abuse the cord. Never use the cord to carry tools or pull the
plug from an outlet. Keep the cord away from heat, oil, sharp edges
or moving parts. Do not operate this tool if the power cord is frayed
or damaged. Replace damaged cords immediately. Damaged cords
increase the risk of electric shock. Do not modify the plug in any way.
Visit www.princessauto.com for more information
7-1/4 in. Metal Cutting Circular Saw V 2.7
5