Solving Problems; Care And Cleaning - Gastroback Design Multicooker Advanced 42538 Operating Instructions Manual

keep warm setting
The multicooker will automatically switch to the KEEP WARM setting once the RICE, RISOTTO
and SLOW COOK settings have finished cooking. It will keep KEEP WARM for up to 5 hours
on the RICE and SLOW COOK settings and up to 30 minutes on the RISOTTO setting.

solving proBleMs

If any problems occur during operation, you will find solutions in this section. Further informa-
tion on processing your food is given in section Tips for Best Results.
Problem
The multicooker suddenly
switches off.
The multicooker has
switched to KEEP WARM
setting before cooking is
complete.

cAre AnD cleAning

• Unplug the power cord from the power outlet.
• A llow all parts to cool before removing the removable cooking bowl. Wash the removable
cooking bowl, stainless steel steaming tray and glass lid in hot, soapy water, rinse and dry
thoroughly.
• G astroback does not recommend that any parts of your multicooker are washed in a dish-
washer as harsh detergents and hot water temperatures may stain or distort the removable
cooking bowl and accessories.
• D o not use abrasive cleaners, steel wool, or metal scouring pads as these can damage the
non-stick surface.
• T he housing can be wiped over with a damp cloth and then dried thoroughly. To prevent
damage to appliance do not use alkaline cleaning agents when cleaning, use a soft cloth
and a mild detergent.
note: If rice has cooked onto the bottom of the removable cooking bowl, fill the bowl with
hot, soapy water and leave to stand for approximately 10 minutes before cleaning.
wArning:
The appliance connector must be removed before the multicooker is cleaned
and that the appliance inlet must be dried before the multicooker is used again.
To prevent damage to the multicooker do not use alkaline cleaning agents when cleaning, use
a soft cloth and mild detergent.
What to Do
• Ensure power plug is connected properly to the appliance
and to power outlet.
• The appliance has been stressed or has overheated due to
cooking conditions. Push the desired cooking button and then
the START|CANCEL button to reset and continue cooking.
Allow a few minutes for appliance to reheat and continue
cooking.
• Press the START|CANCEL button to reset. Then, select the
desired cooking method to continue cooking.
50