Forwarding Calls To A Single Number; Forwarding Calls When Your Phone Is Busy; Stopping Call Forwarding - Cisco SPA 525G User Manual

STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
TIP
STEP 3
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
10 C isco S pa 5 25 U ser G uide V
To forward calls:
Press the Setup button.
Scroll to User Preferences and press Select.
Select Call Preferences.
Under Call Forwarding, press the Right Arrow key to turn call forwarding on and press
the Save softkey.
See the following sections for information on the types of call forwarding.

Forwarding Calls to a Single Number

In the Call Preferences screen, scroll to Forward All Number.
Enter a number to which to forward all calls; for example, your voice mailbox, another
extension, or an outside line. If forwarding calls to an outside line, be sure to enter any
access and area codes required.
If you need to enter a URL, press Option and choose Input IP before entering the call
forwarding information.
Press Save.

Forwarding Calls When Your Phone is Busy

In the Call Preferences screen, scroll to Forward Busy Number.
Enter "vm" for voice mail, or a number to which to forward all calls; for example, another
extension, or an outside line. If forwarding calls to an outside line, be sure to enter any
access and area codes required.
Press Save.
Forwarding Calls When You Donʼt Answer the Phone
In the Call Preferences screen, scroll to Forward No Ans Number.
Enter "vm" for voice mail, or a number to which to forward all calls; for example, another
extension, or an outside line. If forwarding calls to an outside line, be sure to enter any
access and area codes required.
Press Save.
Delaying Call Forwarding When You Donʼt Answer the Phone
In the Call Preferences screen, scroll to Forward No Ans Delay.
Enter the number of seconds to delay forwarding calls, if there is no answer at your
phone.
Press Save.

Stopping Call Forwarding

To stop forwarding calls:
Under Call Forwarding, press the Right Arrow key to turn call forwarding
Off.
Press the Save softkey.
7.11