Resuming A Call; Ending A Call; Transferring Calls; Performing An Attended Transfer - Cisco SPA 525G User Manual

Spa 500 series
Hide thumbs Also See for SPA 525G:
Table of Contents

Advertisement

 

Resuming a Call

Ending a Call

Transferring Calls

STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
Redialing
To redial a number:
STEP 1
STEP 2
STEP 3
8                                                                                                                                                                                                                                                                                                         C isco   S pa   5 25   U ser   G uide   V
To resume the call, press the flashing red line button for the call. If you have
multiple calls, all calls are put on hold except the active call.
To end a call:
If you are using the handset, hang up.
If you are using the speakerphone, press the Speaker button.
You can perform two types of transfers:
Attended—You call the person to whom you are transferring the call and
speak to them before transferring the call.
Blind—You transfer the call without speaking to the other party to which you are
transferring the call

Performing an Attended Transfer

During an active call, or a call on hold, press Transfer.
Either:
Enter the number to which you want to transfer the call; or
Press Directory and either choose a number from the personal
directory.
Press Dial or wait a few seconds. The call is placed on hold and a new line is
opened to dial the number.
Do one of the following:
To transfer the call without waiting for the other person to answer, press Transfer
after the call begins to ring and hang up. If you hang up before the second call
rings, the transfer fails and the first call is disconnected. If you misdial, press the
second line button again to receive a dial tone.
To transfer after speaking privately to the other person, press Transfer at any
time during the conversation.
Performing an Unattended (Blind) Transfer
During an active call, press BlindXfer
Enter the number to which you want to transfer the call and press Dial.
The call is transferred with no further action required on your part.
Press the Redial button and select the desired number.
(Optional) Press EditDial to select a number and modify it (for example, to add an area
code).
Lift the handset or press Dial to select a number. The number is
automatically dialed.
.
7.11  

Advertisement

Table of Contents
loading

Table of Contents