Restarting Your Phone - Cisco SPA 525G User Manual

Problems with Your Phone?
The First step in trouble shooting phone issues is to check each part of the phone and make sure that each part of
the phone is plugged into the correct port. Check the following:
- Ethernet cord connection at the phone and at the wall.
- Power cord connection at the phone and the wall. (Some phones use power over Ethernet, so
this may not apply)
If all the connections are correct, follow steps for Restarting your Cisco Phone.

Restarting Your Phone

STEP 1
STEP 2
STEP 3
If this does not correct your problem contact your IT Support or call
Megagate Broadband at 601.450.5000.
Switching Between the Handset/ Speakerphone During a Call
Cisco S pa 5 25 U ser G uide V 7.11
Occasionally you may need to restart your phone if the screen locks up. To restart your
phone:
Press the Setup button.
Scroll to Device Administration and press Select.
Scroll to Restart and press Select.
The handset can be on the hook when using the speakerphone or headset function.
To switch from the handset to the speakerphone, press the Speakerphone button and
place the handset back on the hook.
2 1