Initial Script Startup Procedures; Viewing Script Information - Monarch 9855 Operator's Handbook Manual

I n i t i a l S c r i p t S t a r t u p P r o c e d u r e s
Before you can start using a script, check the following items:

Check to see if a script is already loaded in the printer. See
Script Information" to continue.

Format flash memory, if needed. See
Chapter 6 for more information.

Download a script to the printer, if needed. See
to continue.
V i e w i n g S c r i p t I n f o r m a t i o n
1. To see if your printer has a script loaded from the Main menu, press
 or  until you see
MAIN MENU
 Scripts
2. Press Enter/Pause. If password protection in enabled, press Feed/Cut2
three times, then press Enter/Pause before you see the Scripts Menu
options.
3. Press2  or until you see
SCRIPTS
 Script Info
4. Press Enter/Pause. What you see depends on the script. If a script is
not loaded, you see "No script loaded." If a script is loaded, you see the
script name and version number, for example,
MYSTORE
Version 1.0
If a script is already loaded, see
you need to download a script, see
Chapter 6.
7-2 Operator's Handbook


"Enabling a
"Formatting Flash
"Formatting Flash
"Downloading a
Script," to continue. If
"Viewing
Memory" in
Script"
Memory" in