The printer's flash memory is cleared and reformatted. This process may
take several minutes. The printer reboots automatically after formatting
flash memory. You need to resend any fonts you want to use to flash
memory again. You return to the "Print Mode Ready" menu.
Checking Available Flash Memory
If you receive errors when downloading a script or other packets, make sure
you have enough flash memory available.
Note:
When you format flash memory, the script and any downloaded
TrueType fonts saved in the printer's flash memory are deleted and
must be resent to the printer.
To check available flash memory, from the Main Menu, select Setup. Then,
follow these steps.
1. Press or until you see
SETUP
Flash Memory
2. Press Enter/Pause.
3. Press or until you see
FLASH MEMORY
Unused Flash
4. Press Enter/Pause. You see the number (in bytes) of available flash
memory.
Unused Flash
1006216_
5. Press Escape/Clear until you see the Main menu.
Setting Defaults 6-11