Using Scripts; Initial Script Startup Procedures; Viewing Script Information - Monarch 9906 Operator's Handbook Manual

U S I N G S C R I P T S
This chapter explains how to load, enable, and delete scripts. You can also enable
status polling and immediate commands.
Using the Scripts menu requires custom software. Scripts can print data streams written
for other printers or define a lookup table. Contact us to create a custom script for your
printer.
Ignore these menus if you do not use Scripts.
Note:
Canc el
All Online
Your System Administrator may limit access to this menu to prevent changes. If
password protection is on, the following is on the display when you try to access the
scripts menu. To continue, ask your System Administrator for the password.
Enter Password
*********
ENTER BACK
I n i t i a l S c r i p t S t a r t u p P r o c e d u r e s
Before you can start using a script, check the following items:
 Check to see if a script is already in the printer. See
continue.
 Format flash memory, if needed. See
more information.

Download a script to the printer, if needed. See
Main Menu
B a tch R epe a t Format
Entry B a tch Op tions
Load E nab le Script
Script Script Info
"Formatting Flash
S e tup Scripts Dia gno stic s
Delete Status Immed
Script Po llin g Commands
"Viewing Script
Memory" in Chapter 6 for
"Downloading a Script" to continue.
7
Information" to

Using Scripts 7-1