U s i n g t h e C o n t r o l P a n e l
The control panel has a two-line LCD display, 2 status lights, and five
buttons. The control panel displays error codes/messages, and allows you
to setup/configure the printer.
Printer Status Lights
Power:
The printer shows a steady green light
when it is on.
The Power light blinks when the battery
needs to be recharged (only on
battery-powered/cart models).
Fault:
The printer shows a blinking amber
light when there is a printer error.
Button Functions
Feed/Cut:
Enter/Pause:
1-6 Operator's Handbook
Prints a label in the on-demand mode.
When the printer is online, feeds a blank label if there is
no print job.
Prints a label with error information that is useful to your
System Administrator if an error is displayed.
When the printer is online, cuts the supply when pressed
and held for two seconds if a knife is installed.
When the printer is offline, changes the displayed value
by one or 10.
When the printer is online, pauses the current print job or
resumes a paused print job. When the printer is offline,
selects the displayed menu item.